Piezo Motor Driver ASIC
Technical coantmesntAsGtill valid
Datasheet
NSD-2101
Piezo Motor Driver ASIC for SQL-RV Series
Reduced Voltage SQUIG...
Description
Technical coantmesntAsGtill valid
Datasheet
NSD-2101
Piezo Motor Driver ASIC for SQL-RV Series
Reduced Voltage SQUIGGLE® RV and UTAF™ Motors
1 General Description
2 Key Features
In combination with the SQUIGGLE® RV or UTAF, the NSD-2101 provides the industry’s smallest piezo motor drive solution with direct battery drive; no boost circuit required.
The NSD-2101 is a dedicated piezo motor driver ASIC capable of driving a SQL-RV Series Reduced Voltage SQUIGGLE® RV motor or UTAF motor from a single 2.3 to 5.5 VDC supply. The motor can be controlled using a standard I²C interface.
The NSD-2101 uses proprietary control technology to dynamically adjust motor drive frequency to maintain optimal motor performance and minimal power consumption over wide temperature ranges and operating conditions. A built-in oscillator eliminates the need for an external master clock.
Industry’s smallest piezo motor drive solution with direct battery drive - Wide input supply voltage: 2.3 to 5.5 VDC - 1.8 x 1.8 mm 16-ball WL-CSP or 4 x 4 mm 16-pin QFN (minimum order quantities for QFN apply)
Low power consumption: - Proprietary design optimizes power usage - Hard power-down mode for lowest power consumption - Idle mode via software for reduced power while preserving frequency calibration
Proprietary frequency tracking controls maximizes motor performance over a range of operating and environmental conditions
Built-in oscillator; no external clock or oscillator required
I²C interface ...
Similar Datasheet