Document
PlDeoasneotcdoentsiagctnyyoouurrPRETproosdhiubctassoalressyrsteeprmessebnatsateidveofnotrhuepidnfatoredmiatnifoornmoantitohinsbdefocoruemdeentsi.gningLIMINAyour products.RY
LED Lamps InGaN and Phosphor
TL1L4-NT0,L
TL1L4-NT0,L
1. Applications
• General Lighting
2. Features
(1) Size: 3.5 (L) mm × 3.5 (W) mm × 2.05 (H) mm (2) High luminous flux LED: 160 lm (typ.) @IF = 350 mA, Ta = 25 (3) Hot Binning: Tested at operating temperature similar to actual set condition.
135 lm (typ.) @IF = 350 mA, Tj = 85 (4) IF Absolute Maximum Ratings: 1.5 A (max) @Ta = 25 (5) Operating temperature range: Topr = -40 to 125 (6) Color: White (color temperature: 5700 K (typ.)) (7) Color Rendering Index: Ra = 70 (min)
3. Packaging and Pin Assignment
4-4P1A
1: Anode 2: Cathode
1 2015-02-02 Rev.0.6
PlDeoasneotcdoentsiagctnyyoouurrPRETproosdhiubctassoalressyrsteeprmessebnatsateidveofnotrhuepidnfatoredmiatnifoornmoantitohinsbdefocoruemdeentsi.gningLIMINAyour products.RY
TL1L4-NT0,L
4. Absolute Maximum Ratings (Note) (Unless otherwise specified, Ta = 25 )
Characteristics
Symbol
Note
Rating
Unit
Forward current (DC)
IF
1500
mA
Forward current (pulsed)
IFP (Note 1)
2000
Power dissipation
PD 5.1 W
Operating temperature
Topr
-40 to 125
Storage temperature
Tstg -40 to 125
Junction temperature
Tj 150
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc).
Note 1: Pulse width 10 ms, duty = 1/10
Fig. 4.1 IF - Ta (Note)
Note: The junction-to-ambient thermal resistance, Rth(j-a), should be kept below 20 /W so that this product is not exposed to a condition beyond the absolute maximum ratings. Rth(j-a): Thermal resistance from the LED junction to ambient temperature
2 2015-02-02 Rev.0.6
PlDeoasneotcdoentsiagctnyyoouurrPRETproosdhiubctassoalressyrsteeprmessebnatsateidveofnotrhuepidnfatoredmiatnifoornmoantitohinsbdefocoruemdeentsi.gningLIMINAyour products.RY
TL1L4-NT0,L
5. Handling Precautions
• This product is sensitive to electrostatic and care must be fully taken when handling products. Particularly in the case that an overvoltage shall be applied, the overflowed energy may cause damage to or possibly result in destruction of the product. Users shall take absolutely secure countermeasures against electrostatic and surge when handling the product.
• A damage to the device might create a tiny leakage path, which causes the LED lamp not to light up in the low-current region or causes a drop in the VF rise volta.