NCP51200

Linear Voltage Regulator 3 A for DDR1, DDR2, DDR3, LPDDR3, DDR4 VTT Termination NCP51200, NCV51200 The NCP/NCV51200 is a source/sink Double Data Rate (DDR) termination regulator specifically designed for low input voltage and low−noise systems where space is a key consideration. The NCP/NCV51200 maintains a fast transient response and only requires a minimum output capacitance of 20 mF. The NCP/NCV51200 supports a remote sensing function and all power requirements for DDR VTT bus termination. The NCP/NCV51200 can also be used in low−power chipsets and graphics processor cores that require dynamically adjustable output voltages. The NCP/NCV51200 is available in the thermally−efficient DFN10 Exposed Pad wettable flank package, and is rated both Green and Pb−free. Features For Automotive Applications Input Voltage Rails: Supports 2.5 V, 3.3 V and 5 V Rails PVCC Voltage Range: 1.1 to 3.5 V Integrated Power MOSFETs Fast Load−Transient Response PGOOD − Logic output pin to Monitor VTT Regulation EN − Logic input pin for Shutdown mode VRI − Reference Input Allows for Flexible Input Tracking Either Directly or Through Resistor Divider Remote Sensing (VTTS) Built−in Soft Start, Under Voltage Lockout and Over Current Limit Thermal Shutdown Small, Low−Profile 10−pin, 3x3 DFN Package NCV51200MWTXG (SFS), NCV51200MLTXG (SLP); − Wettable Flank Options for Enhanced Optical Inspection NCV Prefix for Automotive and Other Applications Requiring Unique Site and Contr...