Document
Global LCD Panel Exchange Center
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
CONTENTS
REVISION HISTORY
GENERAL DESCRIPTION
1. ABSOLUTE MAXIMUM RATINGS 1.1 ABSOLUTE RATING OF ENVIRONMENT 1.2 ELECTRICAL ABSOLUTE RATINGS 1.3 MECHANICAL RATINGS 1.4 THE OTHERS
2. ELECTRICAL SPECIFICATIONS 2.1 TFT LCD MODULE 2.2 BACKLIGHT UNIT 2.3 MATERIAL LIST CONCERNING EMI REGULATIONS
3. INTERFACE SPECIFICATIONS 3.1 THE PIN ASSIGNMENT OF LVDS INTERFACE CONNECTOR 3.2 INPUT SIGNAL TIMING SPECIFICATIONS 3.3 COLOR DATA INPUT ASSIGNMENT 3.4 POWER UP/DOWN SEQUENCE
4. OPTICAL SPECIFICATIONS 4.1 TEST CONDITIONS 4.2 OPTICAL SPECIFICATIONS
5. MECHNICAL DRAWING
6. PRECAUTION 6.1 ASSEMBLY AND HANDLING PRECAUTION 6.2 SAFTY PRECAUTION
7. PACKING 7.1 PACKING SPECIFICATIONS 7.2 PACKING METHOD
8. DEFINITION OF SHIPPING LABEL ON MODULE
Attached 1, Outline Drawing
Issued Date: Apr. 19, 2004 Model No. : N141XB-L02
Approval
2 / 26
Version 3.1 One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Apr. 19, 2004 Model No. : N141XB-L02
Approval
REVISION HISTORY
Version Ver 1.0 Ver 3.0
Ver 3.1
Date Feb. 10,’04 Mar. 30,’04
Apr. 19,’04
Page (New)
Section
Description
All All Preliminary Specification was first issued.
9 2.2 Startup Voltage 1760 Ш 1500 Vrms
Added Leak current
11 Added Note( 8 )
12 3.1 Pin 4~7 Non Connection
15 3.4.1 Added power off timing specifications t7
4 - Modify Block Diagram
Modify Mechanical specification
Module Size Horizontal 299.0 r 0.3 mm , Vertical 228.0 r 0.3 mm
Added min value of depth and weight
7 1.3 Delete Note(4)
9 2.1 Update Power Supply Current Specifications
Revised Note(10) in page 11
Delete “Leakage Current”
12 3.1 Revised Pin 4~7
Delete “ or equivalent “ in Note(2) and Note(3)
15 3.4.1 Change t5 Њ200 msec to t5 Њ100 msec
Change t6 Њ200 msec to t6 Њ100 msec
Delete power off timing specifications t7
17 4.2 Average luminance of white(5 points) : 160 Typ Ш 170 Typ
18 Add Gamma Specification Min and Max Value
Last Drawing Modify outline dimension tolerance r 0.5 Ш r 0.3
Delete Active Area dimension tolerance r 0.2
3 / 26
Version 3.1 One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Apr. 19, 2004 Model No. : N141XB-L02
Approval
GENERAL DESCRIPTION OVERVIEW
This is a 14.1” TFT Liquid Crystal Display module with single CCFL Backlight unit and 30 pins LVDS interface. This module supports 1024 x 768 XGA mode and can display 262,144 colors. The optimum viewing angle is at 6 o’clock direction. The inverter module for Backlight is not built in.
BLOCK DIAGRAM
ɡRxin0(+/-)
Rxin1(+/-) Rxin2(+/-) CLK(+/-) Vcc GND DataEDID CLKEDID VEDID
SCAN DRIVER IC
INPUT CONNECTOR (JAE-FI- XB30SL-HF10)
LVDS INPUT / TIMING CONTROLLER
DC/DC CONVERTER & REFERENCE VOLTAGE
GENERATOR
EDID EEPROM
TFT LCD PANEL (1024x3x768)
DATA DRIVER IC
VL LAMP CONNECTOR (JST-BHTR-02VS-1)
BACKLIGHT UNIT
APPLICATION
-Note Book PC
GENERAL SPECIFICATI0NS
Item Screen Size Bezel opening area Effective display area Pixel number Pixel pitch Pixel Arrangement Display Color Transmissive mode Surface treatments
Specifications 14.1 Diagonal 288.9 (H) x 217.5 (V) 285.7(W)x214.3(H) 1024 x R.G.Bx768 0.279(H)x0.279(V) R.G.B Vertical Stripe 6 bits, 262,144 Normally white Hardness (3H), Anti-glare (Haze 25)
MECHANICAL SPECIFICATIONS
ITEM
MIN.
TYP.
MAX.
Module Horizontal Size Vertical
Depth Weight
298.7 227.7
4.9 405
299.0 228.0
5.2 420
299.3 228.3
5.5 430
Note 1: The maximum thickness of I/O connector area is 5.5mm.
Unit
mm mm mm
g
Unit inch mm mm pixel mm
color
-
Note (1) -
4 / 26
Version 3.1 One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
1. ABSOLUTE MAXIMUM RATINGS
Issued Date: Apr. 19, 2004 Model No. : N141XB-L02
Approval
1.1 ABSOLUTE RATING OF ENVIRONMENT
Item Operating Ambient Temperature Operating Temperature for Panel Storage Temperature Operating Ambient Humidity Storage Humidity Air Pressure Air Pressure Altitude Altitude
Symbol TOP -
TSTG HOP HSTG
-
Min. 0 0 -20 20 10
70.0 12.0
-
Max. +50 +60 +60 90 90 4572
15240
Unit qC qC qC
%RH %RH kPa kPa
m m
Note. (1) Wet bulb temperature should be 39qC Max, and no condensation of water.
Note (2) (1) (1)
Operation Non-Operation
Operation Non-Operation
(2) The surface temperature caused by self-heat radiation of cell itself is specified on this item.
1.2 ELECTRICAL ABSOLUTE RATINGS
(1) TFT LCD Module
Parameter Power supply voltage Logic input voltage
Symbol
VCC VIN
Values Min. Max. -0.3 +4.0 -0.3 VCC+0.3
Unit
V V
Remarks Ta=0~50ºC
(2) Backlight Unit
Parameter
Lamp voltage Lamp current Lamp frequency
Symbol
VL IL fL
Values Min. M.