TWO TONE RINGER
GL6850
GL6850
TWO TONE RINGER
Description
The GL6850 tone ringer is a monolithic device, which incorporates two oscilla...
Description
GL6850
GL6850
TWO TONE RINGER
Description
The GL6850 tone ringer is a monolithic device, which incorporates two oscillators, and output amplifier and a power supply control circuit. The oscillator frequencies can be adjusted over a wide range by selection of external components. One oscillator, normally operated at a low frequency, causes the second oscillator to alternate between its nominal frequency and a related higher frequency. The resulting output is a distinct warbling tone. The output amplifier will drive either a transformer coupled loudspeaker or a piezo-ceramic transducer. The device can be powered from a telephone line or a fixed d.c. supply. The power control circuit has builtin hysteresis to prevent false triggering and rotary dial chirps. The GL6850 can be triggered externally under logic control.
Pin Configuration
VCC 1 TRIG_IN 2
8 OUTPUT 7 HIGHOSC_2
GL6850
LOWOSC_1 3 LOWOSC_2 4 6 5 HIGHOSC_1 GND
Features
Low current consumption. Designed for telephone bell replacement. Small size MINIDIP package. Adjustable 2- frequency tone. Built-in hysteresis prevents false triggering and rotary dial CHIRPS. Alarms or other alerting devices. External triggering or ringer disable. Include ESD protection.
Block Diagram
4 3 2 1
POWER SUPPLY CONTROL CIRCUIT (WITH HYSTERSIS)
LOW FREQUENCY OSCILLATOR
HIGH FREQUENCY OSCILLATOR
OUTPUT AMPLIFIER
5
6
7
8
1
GL6850
Absolute Maximum Ratings (Ta = 25¡ É )
CHARACTERISTICS Supply Voltage Power Dissipation...
Similar Datasheet