GL496

GL496 GL496 s Features 1. High speed response (response frequency : 40MHz) 2. Peak emission wavelength λ p : TYP. 880 mm 3. Half intensity angle ∆θ : ± 22˚ 4. Lead bending type may be used. High Speed Infrared Emitting Diode s Outline Dimensions (Unit : mm) 2-C0.5 3.0 1.5 4.0 1.15 Transparent epoxy resin R-1.25 (1.7) 1. AV equipment 2. Personal computers 3. Portable information terminal equipment 1 (2.54) 0.45 17.5 s Applications 1.4 0.4 2 MIN0.5 1.55 2.8 1 2 1 Anode 2 Cathode s Absolute Maximum Ratings Parameter Forward current *1 Peak forward current Reverse voltage Power dissipation Operating temperature Storage temperature *2 Soldering temperature *1 Pulse width 100 µ s, Duty ratio=0.01 *2 For MAX. 5 seconds at the position of 1.4 mm from the resin edge (Ta=25˚C) Unit mA A V mW ˚C ˚C ˚C Symbol Rating IF 50 0.5 I FM 4 VR 87.5 P - 25 to + 85 Topr Tstg - 40 to + 90 260 Tsol “ In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that occur in equipment using any of SHARP's devices, shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest version of the device specification sheets before using any SHARP's device.” GL496 s Electro-optical Characteristics Parameter Forward voltage Peak forward voltage Reverse current *3 Radiant intensity Radiant flux Peak emission wavelength Half intensity wavelength Terminal capacitance *4 Response frequency Half intensity angle Symbol VF VFM ...