GP1UC10

GP1UC10 Series GP1UC10 Series s Features 1. Low voltage drive type Supply voltage : 2.4 to 3.6V 2. Compact and surface mount type Mounting area : 4/5 compared with GP1U90X 3. Reflow soldering type (240˚C, for 5 seconds or less) 4.Taping reel type (φ 330 mm reel, 1500 pieces) 5. Various B.P.F. (Band Pass Frequency) frequency to meet different user needs (36.7kHz/38kHz/40kHz/56.8kHz) 3V-Operating Type IR Detecting Unit for Remote Control s Outline Dimensions (0.9 ) Detector center (Unit : mm) 7.7 8.1 1 2 3 4 VCC VOUT GND Case GND ( 1.25) g Dummy pattern (GND potential) 3.5 * Pattern example viewed from PWB 3 - 0.9 2 g 3 - 0.9 1.4 3 g Case GND terminal area 2.5 2.5 1. Camera-integral VCRs 2. Cameras 1.6 1 4 6 - R0.4 2.2 5.7 C0.5 2.2 3.75 3.75 area : Be careful not to pull around the pattern. * Tolerance : ± 0.3 mm s Model Line-ups Model No. GP1UC10 GP1UC101 GP1UC102 GP1UC107 B.P.F. frequency 40 38 36.7 56.8 Unit kHz s Internal Block Diagram Vout Limiter B.P.F. Demodulator Integrator Comparator Vcc GND *CR for power filter is necessary. “ In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that occur in equipment using any of SHARP's devices, shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest version of the device specification sheets before using any SHARP's device.” 1.5 s Applications 3.5 3.5 3.4 1.6 2.0 GP1UC10 Series s Absolute Maximum Ratings Parameter...