Subminiature Photointerrupter
GP1S29
GP1S29
s Features
1. Ultra-compact type 2. Thin detection portion ( Thickness of detection portion: 3.2mm )
Sub...
Description
GP1S29
GP1S29
s Features
1. Ultra-compact type 2. Thin detection portion ( Thickness of detection portion: 3.2mm )
Subminiature Photointerrupter
s Outline Dimensions
3 4
( Unit : mm )
2 1 3 Emitter 4 Collector
Internal connection diagram
s Applications
1. Cameras 2. Floppy disk drives Note ) Please use carefully not to receive external disturbing light because the back face of detector element is not covered with case.
(1.15) Center of light path 2.5 (1.0) 3.6 3.2 0.9
1 Anode 2 Cathode 4.0 (C0.8)
(0.8) Slit width
3.0
4.0
(C0.3 ) 4 - 0.15 g 2.54 4 1
g 2.54 * Tolerance :± 0.2mm * Burr's dimensions : 0.15MAX. * Rest of gate : 0.3MAX. * ( ) : Reference dimensions * The dimensions indicated by g refer to those measured from the lead base.
3
2
s Absolute Maximum Ratings
Parameter Forward current Reverse voltage Power dissipation Collector-emitter voltage Emitter-collector voltage Collector current Collector power dissipation Total power dissipation Operating temperature Storage temperature *1 Soldering temperature Symbol IF VR P VCEO VECO IC PC P tot T opr T stg T sol
( Ta = 25˚C )
Rating 50 6 75 35 6 20 75 100 - 25 to + 85 - 40 to + 100 260 Unit mA V mW V V mA mW mW ˚C ˚C ˚C
Input
4.0MIN.
Rest of gate (2) 4 - 0.4
5.1
Output
Soldering area
*1 For 5 seconds
“ In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that occur in equipment using any of SHARP's devices, shown in catalogs, data books, etc. Cont...
Similar Datasheet