High Efficiency Rectifiers
EGP10A-EGP10G
High Efficiency Rectifiers
VOLTAGE RANGE: 50 --- 400 V CURRENT: 1.0 A
Features
Low cost Diffused junction...
Description
EGP10A-EGP10G
High Efficiency Rectifiers
VOLTAGE RANGE: 50 --- 400 V CURRENT: 1.0 A
Features
Low cost Diffused junction Low leakage Low forward voltage High current capability Easily cleaned with alcohol,Isopropanol and similar solvents The plastic material carries U/L recognition 94V-0
Mechanical Data
Case:JEDEC DO--41,molded plastic
Polarity: Color band denotes cathode Weight: 0.012 ounces,0.34 grams Mounting position: Any
DO - 41
Dimensions in millimeters
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ambient temperature unless otherwise specified.
Single phase,half wave,60 Hz,resistive or inductive load. For capacitive load,derate by 20%.
EGP 10A
Maximum recurrent peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forw ard rectified current
9.5mm lead length
@TA=75
Peak forw ard surge current
VRRM VRMS VDC
IF(AV)
50 35 50
8.3ms single half-sine-w ave
IFSM
superimposed on rated load @TJ=125 Maximum instantaneous forw ard voltage
@ 1.0 A
VF
Maximum reverse current
@TA=25
at rated DC blocking voltage @TA=125
IR
Maximum reverse recovery time (Note1)
trr
Typical junction capacitance (Note2)
CJ
Typical thermal resistance
(Note3)
RθJA
Operating junction temperature range
TJ
Storage temperature range
TSTG
NOTE: 1. Measured with IF=0.5A, IR=1A, Irr=0.25A.
2. Measured at 1.0MHz and applied rev erse uoltage of 4.0V DC.
3.Thermal resistance f rom junction to ambient.
EGP 10B
100 70 100
EGP 10C
150 1...
Similar Datasheet