Diagonal 11mm (Type 2/3) Frame Readout CCD Image Sensor
ICX282AQF
Diagonal 11mm (Type 2/3) Frame Readout CCD Image Sensor with Square Pixel for Color Cameras
Description The I...
Description
ICX282AQF
Diagonal 11mm (Type 2/3) Frame Readout CCD Image Sensor with Square Pixel for Color Cameras
Description The ICX282AQF is a diagonal 11mm (Type 2/3)
interline CCD solid-state image sensor with a square pixel array and 5.07M effective pixels. Frame readout allows all pixels' signals to be output independently within approximately 1/3.75 second. In addition, output is possible using various addition and pulse elimination methods. This chip features an electronic shutter with variable charge-storage time. Adoption of a design specially suited for frame readout ensures a saturation signal level equivalent to that when using field readout. High resolution and high color reproductively are achieved through the use of R, G, B primary color mosaic filters as the color filters. Further, high sensitivity and low dark current are achieved through the adoption of Super HAD CCD technology.
This chip is suitable for applications such as electronic still cameras, PC input cameras, etc.
24 pin SOP (Plastic)
Features
High horizontal and vertical resolution
Supports 10 types of readout modes
Frame readout mode, 2× speed mode (1), 2× speed mode (2), 8× speed mode,
center scan mode (1), center scan mode (2), center scan mode (3),
center scan mode (4), AF mode (1), AF mode (2)
Square pixel
Horizontal drive frequency: 22.5MHz
No voltage adjustments (reset gate and substrate bias are not adjusted.)
R, G, B primary color mosaic filters on chip
High sensitivity, lo...
Similar Datasheet