400.00 MHz SAW Filter
400.00 MHz SAW Filter
• Ideal for Receivers in 400.00 MHz • Low-Loss, Coupled-Resonator Quartz Design • Simple External ...
Description
400.00 MHz SAW Filter
Ideal for Receivers in 400.00 MHz Low-Loss, Coupled-Resonator Quartz Design Simple External Impedance Matching Rugged, Hermetic, Low Profile F-11 Package Complies with Directive 2002/95/EC (RoHS Compliant)
SF400
Parameter CW RF Power Dissipation DC Voltage VDC Between Any Two Pins Operating Temperature Range Storage Temperature Range
Absolute Maximum Rating (Ta=25°C) Rating
P +10 VDC ±30 TA -10 ~ +60 Tstg -40 ~ +85
Electronic Characteristics
Parameter
Sym
Minimum
Nominal Frequency (at 25°C) (Center frequency between 3dB point)
fC NS
Insertion Loss
398.00 … 402.00 MHz
IL -
User Signal Passband
BW -
Passband Ripple (p-p)
398.00 … 402.00 MHz
∆α -
Attenuation
DC … 370.00 MHz 397.50 … 402.50 MHz 430.00 … 600.00 MHz
45 αrel
50
Frequency Aging
Absolute Value during the First Year
|fA| -
DC Insulation Resistance Between any Two Pins
- 1.0
Input / Output Impendance (nominal)
--
NS = Not Specified
Unit dBm
V °C °C
Typical
400.00
3.5 ±2.5 2.0
50 3.5 60
50//0
Maximum
NS
5.0 -
Unit
MHz
dB MHz dB
- dB 5.0 dB
- dB 10 ppm/yr - MΩ - Ω//pF
Notes:
1. The frequency fC is defined as the midpoint between the 3dB frequencies.
2. Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture that is connected to a 50Ω test system with VSWR ≤ 1.2:1. The test fixture L and C are adjusted for minimum insertion loss at the filter center frequency, fC. Note that insertion loss, bandwidth, and pass...
Similar Datasheet