Document
ALUMINUM ELECTROLYTIC CAPACITORS
PX Long Life Assurance series
Load life of 20000 hours at 105°C. Compliant to the RoHS directive (2002/95/EC).
PM Long Life
PX
Specifications
Item Category Temperature Range – 55 to +105˚C
Performance Characteristitcs
Rated Voltage Range
10 to 35V
Rated Capacitance Range 1 to 4700µF
Capacitance Tolerance ± 20% (120Hz, 20˚C)
Leakage Current
After 1 minute's application of rated voltage, leakage current is not more than 0.03CV or 4 (mA), whichever is greater.
Tangent of loss angle (tan δ)
Rated voltage (V) tan δ (MAX)
10 0.20
16 0.16
25 0.14
35 0.12
Measurement frequency : 120Hz Temperature : 20˚C
For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF.
Rated voltage (V)
10 16 25 35 Measurement frequency : 120Hz
Stability at Low Temperature Impedance ratio Z–25˚C / Z+20˚C 3 2 2 2
(MAX.)
Z–40˚C / Z+20˚C 4
4
4
4
Endurance
The specifications listed at right shall be met when the capacitors are restored to 20˚C after D.C. bias plus rated ripple current is applied for 20000 hours at 105˚C, the peak voltage shall not exceed the rated voltage.
Capacitance change tan δ Leakage current
Within ±30% of the initial capacitance value 300% or less than the initial specified value Less than or equal to the initial specified value
Shelf Life Marking
After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.
Printed with white color letter on dark brown sleeve.
φD+0.5MAX. P±0.5
Radial Lead Type
Sleeve (P.E.T.)
φd
Pressure relief vent
L +1.5MAX.
15 MIN
4 MIN
(mm) φD 10 12.5 16 18 P 5.0 5.0 7.5 7.5 φd 0.6 0.6 0.8 0.8
Type numbering system (Example : 16V 220µF)
1 2 3 4 5 6 7 8 9 10 11
U PX 1C 2 2 1 MPD
Configuration
φD
Pb-free leadwire Pb-free PET sleeve
10 PD
12.5 to 18
HD
Configuration Capacitance tolerance (± 20%)
Rated capacitance (220µF) Rated voltage (16V) Series name Type
• Please refer to page 20 about the end seal configulation.
Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity.
Dimension table in next page.
CAT.8100Z
ALUMINUM ELECTROLYTIC CAPACITORS
PX series
Dimensions
Cap. (µF)
1
V (Code)
Item Code
010
10 (1A)
CφaDse×siLze
(mm)
Rated ripple (mArms)
105˚C / 100kHz
2.2 2R2
3.3 3R3
4.7 4R7
10 100
22 220
33 330
47 470
100 101
220 221
330 470 1000 2200 3300 4700
331 10 × 16 471 10 × 20 102 12.5 × 25 222 16 × 31.5 332 18 × 35.5 472 18 × 40
504 672 1008 1680 2016 2184
16 (1C)
CφaDse×siLze
(mm)
Rated ripple (mArms)
105˚C / 100kHz
10 × 16 10 × 20 12.5 × 20 16 × 25 18 × 35.5 18 × 40
504 672 1008 1344 2016 2184
25 (1E)
CφaDse×siLze
(mm)
Rated ripple (mArms)
105˚C / 100kHz
10 × 12.5 12.5 × 20 12.5 × 25
16 × 25 16 × 31.5
420 840 1008 1344 1680
35 (1V)
CφaDse×siLze
(mm)
Rated ripple (mArms)
105˚C / 100kHz
10 × 12.5
59
10 × 12.5
84
10 × 12.5
101
10 × 12.5
143
10 × 12.5
294
10 × 12.5
336
10 × 12.5
378
10 × 12.5
420
10 × 20
672
12.5 × 25
1008
16 × 25
1344
16 × 31.5
1680
18 × 40
2184
Frequency coefficient of rated ripple current
Frequency 120Hz
1kHz
10kHz 100kHz or more
Coefficient
0.75
0.80
0.90
1.00
CAT.8100Z
.