Document
ALUMINUM ELECTROLYTIC CAPACITORS
PB Miniature Sized, High Ripple Current High Reliability series
High ripple current load life of 5000 / 7000 hours at +105°C. Suited for ballast application. Compliant to the RoHS directive (2002/95/EC).
CA Long Life
PB
Smaller
PT
Specifications
Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance
Performance Characteristics
– 40 to +105°C (10 to 50V), – 25 to +105°C (160 to 450V)
10 to 450V
0.47 to 3300µF
± 20% at 120Hz, 20°C
Rated Voltage (V)
10 to 50V
160 to 450V
Leakage Current Tangent of loss angle (tan δ) Stability at Low Temperature
———
After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3 (µA) , whichever is greater.
After 2 minutes' application of rated voltage, leakage current is not more than 0.06CV+10 (µA) .
Rated voltage (V) tan δ (MAX.)
10 0.30
16 0.25
25 0.22
35 0.18
50 0.15
Measurement frequency : 120Hz, Temperature : 20°C 160 200 250 350 400 450 0.15 0.15 0.15 0.20 0.24 0.24
Measurement frequency : 120Hz
Rated voltage (V)
10 16 25 35 50 160 200 250 350 400 450
Impedance ratio ZT / Z20 (MAX.) Z–25°C / Z+20°C 3 2 2 2 2 3 3 3 4 6 6
Endurance
The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus
rated ripple current is applied for 5000 hours (7000 hours for φD=10 and 12.5 (10 to 50V)) at 105°C, the peak voltage shall not exceed the rated voltage.
Capacitance change
tan δ Leakage current
Within ± 30% of the initial capacitance value (10 to 50V) Within ± 20% of the initial capacitance value (160 to 450V)
300% or less than the initial specified value (10 to 50V) 200% or less than the initial specified value (160 to 450V)
Less than or equal to the initial specified value
Shelf Life
After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.
Marking
Printed with white color letter on dark brown sleeve.
φD+ MAX P±0.5
Radial Lead Type
Sleeve (P.E.T.)
φd
Pressure relief vent
(φ6.3up)
L + MAX
15MIN
4MIN
(mm) φD 5 6.3 8 10 12.5 16 18 22 25 P 2.0 2.5 3.5 5.0 5.0 7.5 7.5 10.0 12.5 φd 0.5 0.5 0.6 0.6 0.6 0.8 0.8 1.0 1.0
0.5 0.5 0.5 0.5 0.5 0.5 0.5 1.0 1.0
(φD 18) 1.5 (φD 22) 2.0
• Please refer to page 20 about the end seal configulation.
Type numbering system (Example : 160V 22µF)
1 2 3 4 5 6 7 8 9 10 11 12
UPB 2 C 2 2 0 M PD
Configuration
φD
Pb-free leadwire Pb-free PET sleeve
5 DD
6.3 ED
8 · 10
PD
12.5 to 18
HD
22 · 25
RD
Size code Configuration Capacitance tolerance (± 20%) Rated capacitance (22µF)
Rated voltage (160V)
Series name
Type
Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity.
Dimension table in next page.
CAT.8100Z
ALUMINUM ELECTROLYTIC CAPACITORS
PB series
.