UPA1A122MPD

ALUMINUM ELECTROLYTIC CAPACITORS PA Miniature Sized, Low lmpedance, High Reliability For Switching Power Supplies series Lower impedance than PW series. Smaller case size and high ripple current. Compliant to the RoHS directive (2002/95/EC). PA Low Impedance PW Specifications ltem Performance Characteristics Category Temperature Range – 55 to +105˚C Rated Voltage Range 6.3 to 35V Rated Capacitance Range 180 to 10000µF Capacitance Tolerance ± 20% at 120Hz, 20˚C Leakage Current After 1 minute's application of rated voltage, leakage current is not more than 0.03CV or 4 (µA), whichever is greater. Rated voltage (V) 6.3 10 16 25 35 120Hz 20˚C Tangent of loss angle (tan δ) tan δ (MAX.) 0.22 0.19 0.16 0.14 0.12 For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. Rated voltage (V) 6.3 10 16 25 35 120Hz Stability at Low Temperature Impedance ratio ZT / Z20 (MAX.) Z–55˚C / Z+20˚C 3 3 3 3 3 Endurance The specifications listed at right shall be met when the capacitors are restored to 20˚C after D.C. bias plus rated ripple current is applied for 5000 hours (3000 hours for φD=8, 4000 hours for φD=10) at 105˚C, the peak voltage shall not exceed the rated voltage. Capacitance change tan δ Leakage current Within ± 20% of the initial capacitance value (6.3V, 10V : ± 30%) 200% or less than the initial specified value (6.3V, 10V : 300%) Less than or equal to the initial specified value Shelf Life Marking After storing the capacitors ...