DatasheetsPDF.com

UMF0J101MDD Dataheets PDF



Part Number UMF0J101MDD
Manufacturers Nichicon
Logo Nichicon
Description ALUMINUM ELECTROLYTIC CAPACITORS
Datasheet UMF0J101MDD DatasheetUMF0J101MDD Datasheet (PDF)

ALUMINUM ELECTROLYTIC CAPACITORS MF 5mmL, Low Impedance series Low impedance over wide temperature range of – 55 to +105°C, with 5mm height. Suited for DC-DC converters where smaller case size and lower impedance are required. Compliant to the RoHS directive (2002/95/EC). MF Low Impedance MT Specifications Item Performance Characteristics Category Temperature Range – 55 to +105°C Rated Voltage Range 6.3 to 35V Rated Capacitance Range 1 to 100µF Rated Capacitance Tolerance ± 20% at 12.

  UMF0J101MDD   UMF0J101MDD


Document
ALUMINUM ELECTROLYTIC CAPACITORS MF 5mmL, Low Impedance series Low impedance over wide temperature range of – 55 to +105°C, with 5mm height. Suited for DC-DC converters where smaller case size and lower impedance are required. Compliant to the RoHS directive (2002/95/EC). MF Low Impedance MT Specifications Item Performance Characteristics Category Temperature Range – 55 to +105°C Rated Voltage Range 6.3 to 35V Rated Capacitance Range 1 to 100µF Rated Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current Tangent of loss angle (tan δ) After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3 (µA), whichever is greater. Measurement frequency : 120Hz, Temperature : 20°C Rated voltage (V) tan δ (MAX.) 6.3 0.22 10 0.20 16 0.18 25 0.14 35 0.12 Stability at Low Temperature Rated voltage (V) Impedance ratio ZT / Z20 (MAX.) Z– 25°C / Z+20°C Z– 55°C / Z+20°C 6.3 2 4 Measurement frequency : 120Hz 10 16 25 35 2222 4333 Endurance Shelf Life Marking The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 105°C. Capacitance change tan δ Leakage current Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value After storig the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Printed with white color letter on dark brown sleeve. Radial Lead Type Sleeve (P.E.T.) φd Type numbering system (Example : 25V 10µF) 1 2 3 4 5 6 7 8 9 10 11 UMF 1 E 1 0 0 M DD φ D+0.5 MAX P ± 0.5 L+1MAX 15 MIN 4 MIN (mm) φ D 4 5 6.3 P 1.5 2.0 2.5 φ d 0.45 0.45 0.45 Configuration φD Pb-free leadwire Pb-free PET sleeve 4 to 6.3 DD Configuration Capacitance tolerance (± 20%) Rated capacitance (10µF) Rated voltage (25V) Series name Type Dimensions Cap.(µF) 1 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 V Code 010 1R5 2R2 3R3 4R7 6R8 100 150 220 330 470 680 101 4×5 5×5 5×5 6.3 × 5 6.3 × 5 6.3 0J 5.0 2.6 2.6 1.3 1.3 50 5 × 5 80 5 × 5 80 6.3 × 5 115 115 Frequency coefficient of rated ripple current Frequency 50 Hz 120 Hz 300 Hz 1 kHz Coefficient 0.35 0.50 0.64 0.83 10 1A 4×5 5×5 2.6 80 5 × 5 2.6 80 6.3 × 5 1.3 115 6.3 × 5 10 kHz or more 1.00 16 25 35 1C 1E 1V 4 × 5 5.0 50 4 × 5 5.0 50 4 × 5 5.0 50 4 × 5 5.0 50 4 × 5 5.0 50 4 × 5 5.0 50 4 × 5 5.0 50 5 × 5 2.6 80 5.0 50 5 × 5 2.6 80 5 × 5 2.6 80 2.6 80 6.3 × 5 1.3 115 6.3 × 5 1.3 115 2.6 80 6.3 × 5 1.3 115 6.3 × 5 1.3 115 1.3 115 6.3 × 5 1.3 115 1.3 115 Case size φD×L (mm) Impedance Rated ripple Max. Impedance (Ω) at 20°C 100kHz Rated ripple current (mArms) at 105°C 100kHz Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. CAT.8100Z .


UMF0J100MDD UMF0J101MDD UMF0J150MDD


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)