ALUMINUM ELECTROLYTIC CAPACITORS
ALUMINUM ELECTROLYTIC CAPACITORS
LS Snap-in Terminal Type, 85°C Standard series
Withstanding 3000 hours application of r...
Description
ALUMINUM ELECTROLYTIC CAPACITORS
LS Snap-in Terminal Type, 85°C Standard series
Withstanding 3000 hours application of rated ripple current at 85°C. Compliant to the RoHS directive (2002/95/EC).
LS
Smaller
LG
Specifications
Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current
Tangent of loss angle (tan δ)
Stability at Low Temperature
Performance Characteristics
– 40 to +85°C (16 to 250V), – 25 to +85°C (350 to 450V)
16 to 450V
56 to 56000µF
± 20% at 120Hz, 20°C
I 3 CV (µA) (After 5 minutes' application of rated voltage) [C : Rated Capacitance (µF) V : Voltage (V)]
Measurement frequency :120Hz, Temperature : 20°C
Rated voltage (V) tan δ (MAX.)
16 0.50
25 0.40
35 0.35
50 0.30
63 0.25
80 0.20
100 0.20
160 0.15
180 0.15
200 0.15
250 0.15
350 0.15
400 0.15
450 0.20
Rated voltage (V)
Impedance ratio Z – 25°C/ Z+20°C ZT/Z20(MAX.) Z – 40°C/ Z+20°C
16 to 100 4 20
Measurement frequency : 120Hz
160 to 250
350 to 450
38 12 —
Endurance
The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 3000 hours at 85°C, the peak voltage shall not exceed the rated voltage.
Capacitance change tan δ Leakage current
Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value
Shelf Life Marking
After storing the capacitors under no load at...
Similar Datasheet