ALUMINUM ELECTROLYTIC CAPACITORS
ALUMINUM ELECTROLYTIC CAPACITORS
LG Snap-in Terminal Type, 85°C Smaller-Sized series
One rank smaller case sized than L...
Description
ALUMINUM ELECTROLYTIC CAPACITORS
LG Snap-in Terminal Type, 85°C Smaller-Sized series
One rank smaller case sized than LN series. Suited for equipment down sizing. Compliant to the RoHS directive (2002/95/EC).
LS
Smaller
LG
Specifications
Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current
Performance Characteristics – 40 to + 85°C (160 to 250V), – 25 to + 85°C (400 to 450V) 160 to 450V 120 to 3900µF ± 20% at 120Hz, 20°C I 3 CV (µA) (After 5 minutes' application of rated voltage) [C : Rated Capacitance (µF) V : Voltage (V)]
Tangent of loss angle (tan δ)
Rated voltage (V) tan δ (MAX.)
160 to 400 0.15
450 0.20
Measurement frequency : 120Hz, Temperature : 20°C
Stability at Low Temperature
Rated voltage(V)
Impedance ratio ZT/Z20 (MAX.)
Z – 25°C/ Z+20°C
160 to 250 4
Endurance
The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 2000 hours at 85°C, the peak voltage shall not exceed the rated voltage.
400 450 8
Measurement frequency : 120Hz
Capacitance change tan δ Leakage current
Within ± 20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value
Shelf Life Marking
After storing the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the char...
Similar Datasheet