SPEC. NUMBER
PROPRIETARY NOTE THIS SPECIFICATION IS THE PROPERTY OF BOE HF AND SHALL NOT BE REPRODUCED OR COPIED WITHOUT THE WRITTEN PERMISSION OF BOE HF AND MUST BE RETURNED TO BOE HF UPON ITS REQUEST
PRODUCT GROUP Rev.
TFT-LCD
P0
ISSUE DATE 2011.08.15
PAGE 1 OF 35
HB140WX1-100 Preliminary Product Specification P0
EE22JJXX..CCOOMM
HEFEI BOE OPTOELECTRONICS TECHNOLOGY
R2010-6053-O(1/3)
1 A4(210 X 297)
SPEC. NUMBER
REV. P0
ECN No. -
PRODUCT GROUP
REV
TFT- LCD PRODUCT
P0
SPEC. TITLE HB140WX1-100 Preliminary Product Specification
REVISION HISTORY
DESCRIPTION OF CHANGES Initial Release
DATE 2011.08.15
ISSUE DATE 2011.08.15
PAGE 2 OF 35
PREPARED
EE22JJXX..CCOOMM
R2010-6053-O(2/3)
2 A4(210 X 297)
SPEC. NUMBER
PRODUCT GROUP
REV
TFT- LCD PRODUCT
P0
SPEC. TITLE HB140WX1-100 Preliminary Product Specification
Contents
No. Items 1.0 General Description 2.0 Absolute Maximum ratings 3.0 Electrical specifications. 4.0 Optical specifications. 5.0 Interface Connection 6.0 Signal Timing Specification 7.0 Signal Timing waveforms 8.0 Input Signals, Display Colors & Gray Scale of Colors
EE22JJXX..CCOOMM9.0 PowerSequence
10.0 Connector description 11.0 Mechanical Characteristics 12.0 Reliability Test 13.0 Handling & Cautions. 14.0 Label 15.0 Packing information 16.0 Mechanical Outline Dimension 17.0 EDID Table
ISSUE DATE
2011.08.15 PAGE
3 OF 35
Page 4 6 7 9 14 18 20 22 23 24 25 26 26 27 29 30 32
R2010-6053-O(3/3)
3 A4(210 X 297)
SPEC. NUMBER
PRODUCT GROUP
REV
TFT- LCD PRODUCT
P0
SPEC. TITLE HB140WX1-100 Preliminary Product Specification
ISSUE DATE
2011.08.15 PAGE
4 OF 35
1.0 GENERAL DESCRIPTION
1.1 Introduction
HB140WX1-100 is a color active matrix TFT LCD module using amorphous silicon TFT's (Thin Film Transistors) as an active switching devices. This module has a 14.0 inch diagonally measured active area with WXGA resolutions (1366 horizontal by 768 vertical pixel array). Each pixel is divided into RED, GREEN, BLUE dots which are arranged in vertical Stripe and this module can display 262,144 colors. The TFT-LCD panel used for this module is a low reflection and higher color type. Therefore, this module is suitable for Notebook PC. The LED Driver for back-light driving is built in this model. All input signals are LVDS interface compatible.
LED Driver
LED Lighting Bar
Gate Driver Connector 1
LVDS
EE22JJXX..CCOOMInput MSignal
LVDS Rx +
T/CON +
TFT LCD PanelBACK LIGHT (Fluorescent Lamp)
Mini-LVDS Tx
1366 × 768
VDD
DC/DC Gamma Vcom
Source Driver
1.2 Features
1 Channel LVDS Interface with 1 pixel / clock Thin and light weight 6-bit color depth, display 262K colors Single LED Lighting Bar. (Top side/Horizontal Direction) Data enable signal mode Side Mounting Frame Green Product (RoHS & Halogen free product) On board LED Driving circuit Low driving voltage and low power consumption On board EDID chip
R2010-6053-O(3/3)
4 A4(210 X 297)
PRODUCT GROUP
REV
SPEC. NUMBER
TFT- LCD PRODUCT
P0
SPEC. TITLE HB140WX1-100 Preliminary Product Specification
1.3 Application Notebook PC (Wide type)
ISSUE DATE
2011.08.15 PAGE
5 OF 35
1.4 General Specification The followings are general specifications at the model HB140WX1-100. (listed in Table 1.)
Parameter
Specification
Unit
Active area
309.4(H) × 173.95(V)
mm
Number of pixels Pixel pitch Pixel arrangement
1366 (H) × 768 (V)
pixels
EE22JJXX..CCOOMM0.2265(H) × 0.2265(V)
RGB Vertical stripe
mm
Display colors Display mode
262K Normally White
colors
Dimensional outline 323.5 (H) × 192 (V) × 5.2 (D:max)
mm
Weight
350 (max)
g
Surface treatment Glare (Clear Black) / Hard coating 3H
Back-light
Upper edge side, 1-LED Lighting Bar type
Power consumption
PD : 0.95 (max) PBL : 2.9 (max) Ptotal : 3.85 (max)
W W W
Remarks Note 1
Notes : 1. LED Lighting Bar (40*LED Array)
R2010-6053-O(3/3)
5 A4(210 X 297)
SPEC. NUMBER
PRODUCT GROUP
REV
TFT- LCD PRODUCT
P0
SPEC. TITLE HB140WX1-100 Preliminary Product Specification
2.0 ABSOLUTE MAXIMUM RATINGS
ISSUE DATE
2011.08.15 PAGE
6 OF 35
The followings are maximum values which, if exceed, may cause faulty operation or damage to the unit. The operational and non-operational maximum voltage and current values are listed in Table 2.
< Table 2. Absolute Maximum Ratings>
Ta=25+/-2°C
Parameter
Symbol Min.
Max.
Unit
Remarks
Power Supply Voltage Logic Supply Voltage
VDD -0.3 4.0 VIN Vss-0.3 VDD+0.3
V V
Note 1
Operating Temperature Storage Temperature
TOP TST
0 +50 -20 +60
℃ ℃
Note 2
Notes : 1. Permanent damage to the device may occur if maximum values are exceeded
EE22JJXX..CCOOMMfunctional operation should be restricted to the condition described under normal
operating conditions.
2. Temperature and relative humidity range are shown in the figure below. 95 % RH Max. ( 40 OC ≥ Ta) Maximum wet - bulb temperature at 39 OC or less. (Ta > 40 OC) No condensation.
Relative Humudity
100 90 80
(40, 95) (50, 80)
.