ALUMINUM ELECTROLYTIC CAPACITORS
ALUMINUM ELECTROLYTIC CAPACITORS
GJ Snap-in Terminal Type, 105°C Low-Profile Sized series
Withstanding 3000 hours appli...
Description
ALUMINUM ELECTROLYTIC CAPACITORS
GJ Snap-in Terminal Type, 105°C Low-Profile Sized series
Withstanding 3000 hours application of rated ripple current at 105°C. Ideally suited for flat design fo switching power supply. Addition of 450V rated voltage. Compliant to the RoHS directive (2002/95/EC).
GU
Low Profile
GJ
Low Profile
Specifications
Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current
GJ(15)
Performance Characteristics
– 40 to +105°C (160 to 250V) , – 25 to +105°C (315 to 450V) 200 to 450V 47 to 680µF ± 20% at 120Hz, 20°C 3 CV (µA) (After 5 minutes' application of rated voltage) [C : Rated Capacitance (µF) V : Voltage (V)]
Tangent of loss angle (tan δ)
Rated voltage(V) tan δ (MAX.)
200 to 400 0.15
450 0.20
Measurement frequency : 120Hz, Temperature : 20°C
Stability at Low Temperature
Rated voltage(V)
Impedance ratio ZT/Z20(MAX.)
Z – 25°C/ Z+20°C Z – 40°C/ Z+20°C
Measurement frequency : 120Hz
200 250 3 12
400 450 8 —
Endurance
The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 3000 hours at 105°C, the peak voltage shall not exceed the rated voltage.
Capacitance change tan δ Leakage current
Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value
Shelf Life
After storing the capacitors under no load at 105°C fo...
Similar Datasheet