Rail-to-rail CMOS dual operational amplifier
TS912, TS912A, TS912B
Rail-to-rail CMOS dual operational amplifier
Features
■ Rail-to-rail input and output voltage ra...
Description
TS912, TS912A, TS912B
Rail-to-rail CMOS dual operational amplifier
Features
■ Rail-to-rail input and output voltage ranges ■ Single (or dual) supply operation
from 2.7 to 16 V ■ Extremely low input bias current: 1 pA typ. ■ Low input offset voltage: 2 mV max. ■ Specified for 600 Ω and 100 Ω loads ■ Low supply current: 200 μA/amplifier
(VCC = 3 V) ■ Latch-up immunity ■ ESD tolerance: 3 kV ■ Spice macromodel included in this specification
Related products
■ See TS56x series for better accuracy and smaller packages
Description
The TS912 device is a rail-to-rail CMOS dual operational amplifier designed to operate with a single or dual supply voltage.
The input voltage range Vicm includes the two supply rails VCC+ and VCC-. The output reaches VCC- +30 mV, VCC+ -40 mV, with RL = 10 kΩ and VCC- +300 mV, VCC+ -400 mV, with RL = 600 Ω. This product offers a broad supply voltage operating range from 2.7 to 16 V and a supply current of only 200 μA/amp. (VCC = 3 V). Source and sink output current capability is typically 40 mA (at VCC = 3 V), fixed by an internal limitation circuit.
Datasheet −production data
N DIP8 (plastic package)
D SO-8 (plastic micropackage)
Pin connections (top view)
November 2012
This is information on a product in full production.
Doc ID 2325 Rev 7
1/21
www.st.com
21
Contents
Contents
TS912, TS912A, TS912B
1
Absolute maximum ratings and operating conditions . . . . . . . . . . . . . 3
2
Schematic diagram . . . . . . . . . . . . . . . . . . . . . . . ...
Similar Datasheet