Document
ALUMINUM ELECTROLYTIC CAPACITORS
GG Snap-in Terminal Type, 105°C Ultra-Smaller-Sized series
One rank smaller case sized than GN series. Suited for equipment down sizing. Compliant to the RoHS directive (2002/95/EC).
GN
Smaller
GG
Smaller
Specifications
GL
Item
Performance Characteristics
Category Temperature Range
– 40 to +105°C (160 to 250V) , – 25 to +105°C (400 to 450V)
Rated Voltage Range
160 to 450V
Rated Capacitance Range
100 to 3300µF
Capacitance Tolerance
± 20% at 120Hz, 20°C
Leakage Current
I 3 CV(µA) (After 5 minutes' application of rated voltage) [C : Rated Capacitance (µF) V : Voltage (V)]
Tangent of loss angle (tan δ) Rated voltage (V) tan δ (MAX.)
160 to 420 0.15
450 0.20
Measurement frequency : 120Hz, Temperature : 20°C
Stability at Low Temperature
Rated voltage (V)
Impedance ratio ZT/Z20 (MAX.)
Z – 25°C/ Z+20°C
160 to 250 4
400 to 450 8
Measurement frequency : 120Hz Temperature : 20°C
Endurance
Shelf Life Marking
The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 2000 hours at 105°C, the peak voltage shall not exceed the rated voltage.
After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the characteristic requirements listed at right.
Printed with white color letter on black sleeve.
Capacitance change tan δ Leakage current
Within ± 20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value
Capacitance change tan δ Leakage current
Within ± 20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value
Drawing
Polarity bar Sleeve (P.E.T.)
φ D+1.5MAX. 4.0± 0.5 2.5
L± 2 Pressure relief vent
4.0± 0.5
10 ± 0.1
10
0.8
+0.2 -0.1
0.8+-00..21
2-2φ ± 0.1 (PC board hole dimensions)
1.5
+0.2 -0.1
(Terminal dimensions)
The other terminal is also available upon request. Please refer page 272 for schematic of dimensions.
Type numbering system (Example : 400V 180µF)
1 2 3 4 5 6 7 8 9 10 11 12 13 14
L GG 2 G 1 8 1 M EL A 2 5
Configuration Capacitance tolerance (± 20%) Rated capacitance (180µF)
Rated voltage (400V) Series name Type
Case length code Case dia. code
φD Code 22 Z 25 A 30 B 35 C
Minimum order quantity : 50pcs. Dimension table in next page.
CAT.8100Z
ALUMINUM ELECTROLYTIC CAPACITORS
GGseries
Dimensions
Cap. (µF) 560 680 820
1000
1200
1500
1800 2200 2700 3300
Size
φD × L(mm)
22 × 25 22 × 30 25 × 25 22 × 35 25 × 30 22 × 40 25 × 35 30 × 25 25 × 40 30 × 30 35 × 25 25 × 45 30 × 35 35 × 30 30 × 40 35 × 30 30 × 45 35 × 35 35 × 40 35 × 45
160V (2C)
Rated ripple Leakage Current
(mA)
(mA)
Code
1400
0.89
LGG2C561MELZ25
1500
0.98
LGG2C681MELZ30
1700
0.98
LGG2C681MELA25
2000
1.08
LGG2C821MELZ35
2000
1.08
LGG2C821MELA30
2100
1.20
.