Document
ALUMINUM ELECTROLYTIC CAPACITORS
RS Compact & Low-profile Sized series
More compact & low profile case sizes than VS series. Compliant to the RoHS directive (2002/95/EC).
(Through 100V only)
RZ
High Te m p e r a t u re
RS
Specifications
Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance
– 40 to +85˚C 6.3 to 400V 0.1 to 10000µF ± 20% at 120Hz, 20˚C
Performance Characteristics
Leakage Current
Rated voltage (V)
6.3 to 100
After 1 minute's application of rated voltage, leakage current is not more than 0.03CV or 4 (µA), whichever is greater.
After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3 (µA), whichever is greater.
160 to 400
After 1 minute's application of rated voltage. I = 0.04CV+100 (µA) or less
Tangent of loss angle (tan δ) Stability at Low Temperature
For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. Measurement frequency : 120Hz, Temperature : 20˚C Rated voltage (V) 6.3 10 16 25 35 50 63 100 160 200 250 400 tan δ (MAX.) 0.28 0.24 0.20 0.16 0.14 0.12 0.10 0.08 0.20 0.20 0.20 0.25
Measurement frequency : 120Hz
Rated voltage (V)
6.3 10 16 25 35 50 63 100 160 200 250 400
Impedance ratio Z– 25˚C / Z+20˚C 5 4 3 2 2 2 2 2 3 3 3 6
ZT / Z20 (MAX.) Z– 40˚C / Z+20˚C 12 10
8
5
4
3
3
3
4
4
6 10
Endurance
Shelf Life Marking
The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 85°C.
Capacitance change tan δ Leakage current
Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value
After storing the capacitors under no load at 85˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.
Printed with white color letter on black sleeve.
Radial Lead Type
Type numbering system (Example : 10V 330µF)
φD+0.5 MAX P±0.5
Sleeve (P.E.T.)
φd
1 2 3 4 5 6 7 8 9 10 11 12
URS 1 A 3 3 1 MPD
Pressure relief vent (φ8up)
L+ MAX
15MIN
4MIN
(mm) φD 5 6.3 8 10 12.5 16 18 20 P 2.0 2.5 3.5 5.0 5.0 7.5 7.5 10.0 φd 0.5 0.5 0.6 0.6 0.6 0.8 0.8 1.0
(φD 20) 1.5 (φD 20) 2.0
• Please refer to page 20 about the end seal configulation.
Configuration
φD
Pb-free leadwire Pb-free PET sleeve
5 · 6.3
DD
8 · 10
PD
12.5 to 18
HD
20 RD
Size code Configuration Capacitance tolerance (±20%) Rated capacitance (330µF) Rated voltage (10V)
Series name Type
Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity.
Dimension table in next page.
CAT.8100Z
ALUMINUM ELECTROLYTIC CAPACITORS
RS series
Dimensions
Cap.(µF) 0.1 0.22 0.33 0.47 1 2.2 3.3 4.7
10 22 33 47 100 220 330 470 1000 2200 3300 4700 6800 10000
V Code 0R1 R22 R33 R47 010 2R2 3R3 4R7 100 220 330 470 101 221 331 471.
Similar Datasheet