DatasheetsPDF.com

UPM1K102MDD Dataheets PDF



Part Number UPM1K102MDD
Manufacturers Nichicon
Logo Nichicon
Description ALUMINUM ELECTROLYTIC CAPACITORS
Datasheet UPM1K102MDD DatasheetUPM1K102MDD Datasheet (PDF)

ALUMINUM ELECTROLYTIC CAPACITORS PM Extremely Low Impedance, High Reliability series High reliability withstanding 5000 hour load life at +105°C (3000/2000 hours for smaller case sizes as specified below). Capacitance ranges available based on the numerical values in E12 series under JIS. Compliant to the RoHS directive (2002/95/EC). (through 100V only) PM Smaller Specifications PW Item Performance Characteristics Category Temperature Range Rated Voltage Range Rated Capacitance Range Capac.

  UPM1K102MDD   UPM1K102MDD


Document
ALUMINUM ELECTROLYTIC CAPACITORS PM Extremely Low Impedance, High Reliability series High reliability withstanding 5000 hour load life at +105°C (3000/2000 hours for smaller case sizes as specified below). Capacitance ranges available based on the numerical values in E12 series under JIS. Compliant to the RoHS directive (2002/95/EC). (through 100V only) PM Smaller Specifications PW Item Performance Characteristics Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current – 55 to +105°C (6.3 to 100V), –40 to +105°C (160 to 400V), –25 to +105°C (450V) 6.3 to 450V 0.47 to 15000µF ± 20% at 120Hz, 20°C Rated Voltage (V) Leakage current 6.3 to 100 160 to 450 After 1 minute's application of rated voltage, leakage current is not more CV <= 1000 : I = 0.1CV+40 (µA) max. (1 minute's) than 0.03CV or 4 (µA), whichever is greater. CV > 1000 : I = 0.04CV+100 (µA) max. (1 minute's) For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. Measurement frequency : 120Hz, Temperature : 20°C Tangent of loss angle (tan δ) Rated Voltage (V) tan δ (MAX.) 6.3 0.22 10 0.19 16 0.16 25 0.14 35 0.12 50 0.10 63 to 100 160 to 350 400 · 450 0.08 0.20 0.25 Rated voltage (V) 6.3 · 10 16 25 · 35 50 to 100 160 · 200 250 315 · 350 400 Stability at Low Temperature Impedance Z– 25°C / Z+20°C — — — — — — — — ratio (MAX.) Z– 40°C / Z+20°C — — — — 4 6 8 10 Z– 55°C / Z+20°C 4 3 3 2 ———— 450 120Hz 15 — — Endurance Shelf Life Marking Radial Lead Type Sleeve (P.E.T.) The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 5000 hours (2000 hours for φD=5 and 6.3, 3000 hours for φD=8) at 105°C, the peak voltage shall not exceed the rated voltage. After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the characteristic requirements listed at right. Printed with white color letter on dark brown sleeve. Capacitance change Within ±20% of the initial capacitance value tan δ 200% or less than the initial specified value Leakage current Less than or equal to the initial specified value Capacitance change Within ±20% of the initial capacitance value tan δ 150% or less than the initial specified value Leakage current Less than or equal to the initial specified value Type numbering system (Example : 25V 470µF) 1 2 3 4 5 6 7 8 9 10 11 12 UPM 1 E 4 7 1 MPD φd Size code Configuration Type Code Capacitance tolerance (± 20%) Rated capacitance (470µF) Small Dia Low Profile 6 φD+0.5 MAX. P±0.5 Rated voltage (25V) Series name Pressure relief vent (φ6.3up) L+ MAX. 15MIN 4MIN (φD < 10) 1.5 (φD >= 10) 2.0 (mm) φD 5 6.3 8 10 12.5 16 18 P 2.0 2.5 3.5 5.0 5.0 7.5 7.5 φd 0.5 0.5 0.6 0.6 0.6 0.8 0.8 In case L > 25 for the φ12.5 dia. unit, lead dia. φ d = 0.8mm. Configuration φD Pb-free leadwire Pb-free PET sleeve 5 DD 6.3 ED 8 · 10 PD 12.5 to 18 HD Frequency coefficient of Rated voltage rated ripple current Rated voltage • Please refer to page 20 about the end seal configulation. Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. Dimension table in next page. 6.3 to 100V (10kHz to 200kHz=1) 6.3 to 100V (10kHz to 200kHz=1) 160 to 450V Cap.(µF) Type Frequency coefficient 15000 10000 Frequency coefficient 150006800 100004700 68003300 47002200 1500 3300 1000 2200 680 1500 470 1000 330 680 220 470 150 330 100 Cap.(µF) 220 68 150 47 33 100 22 68 15 47 10 330.68 220.47 120Hz 120Hz 300Hz 1kHz 300Hz 1kHz 15 0 10 0.5 0.6 0.7 0.8 Frequency coefficient 0.9 500H.6z8 120Hz 300Hz 1kHz 1.0 110kHz or more 0.08.047 1.00 1.25 1.40 1.60 CAT.8100Z0 0.5 0.6 0.7 0.8 0.9 1.0 Frequency coefficient ALUMINUM ELECTROLYTIC CAPACITORS PM series Dimensions Cap.(µF) 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 10000 12000 15000 V(Code) Code Size code 220 270 330 390 470 560 680 820 101 121 151 181 221 271 331 391 471 561 681 821 102 122 152 182 222 272 332 392 472 562 682 822 103 123 153 6.3 (0J) —6 5 × 11 5 × 11 6.3 × 11 6.3 × 11 6.3 × 11 6.3 × 15 6.3 × 15 8 × 11.5 8 × 15 8 × 15 8 × 20 8 × 20 10 × 20 10 × 20 10 × 25 10 × 31.5 10 × 31.5 12.5 × 25 12.5 × 25 12.5 × 31.5 12.5 × 35.5 12.5 × 40 16 × 31.5 16 × 35.5 16 × 40 18 × 35.5 18 × 40 10 × 12.5 10 × 12.5 10 × 15 10 × 15 12.5 × 15 12.5 × 15 12.5 × 15 16 × 15 16 × 15 18 × 15 18 × 15 16 × 20 18 × 20 18 × 20 18 × 25 18 × 31.5 18 × 31.5 10 (1A) —6 5 × 11 5 × 11 6.3 × 11 6.3 × 11 6.3 × 11 6.3 × 11 6.3 × 15 6.3 × 15 8 × 11.5 8 × 15 8 × 15 8 × 20 8 × 20 10 × 20 10 × 20 10 × 25 10 × 31.5 12.5 × 20 12.5 × 25 12.5 × 31.5 12.5 × 35.5 12.5 × 40 16 × 31.5 16 × 35.5 16 × 35.5 16 × 40 18 × 40 10 × 12.5 10 × 12.5 10 × 1.


UPM1J821MPD UPM1K102MDD UPM1K102MED


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)