Document
ALUMINUM ELECTROLYTIC CAPACITORS
PM Extremely Low Impedance, High Reliability series
High reliability withstanding 5000 hour load life at +105°C (3000/2000 hours for smaller case sizes as specified below). Capacitance ranges available based on the numerical values in E12 series under JIS. Compliant to the RoHS directive (2002/95/EC).
(through 100V only)
PM
Smaller
Specifications
PW
Item
Performance Characteristics
Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance
Leakage Current
– 55 to +105°C (6.3 to 100V), –40 to +105°C (160 to 400V), –25 to +105°C (450V)
6.3 to 450V
0.47 to 15000µF
± 20% at 120Hz, 20°C
Rated Voltage (V) Leakage current
6.3 to 100
160 to 450
After 1 minute's application of rated voltage, leakage current is not more CV <= 1000 : I = 0.1CV+40 (µA) max. (1 minute's)
than 0.03CV or 4 (µA), whichever is greater.
CV > 1000 : I = 0.04CV+100 (µA) max. (1 minute's)
For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. Measurement frequency : 120Hz, Temperature : 20°C
Tangent of loss angle (tan δ) Rated Voltage (V) tan δ (MAX.)
6.3 0.22
10 0.19
16 0.16
25 0.14
35 0.12
50 0.10
63 to 100 160 to 350 400 · 450
0.08
0.20
0.25
Rated voltage (V)
6.3 · 10 16 25 · 35 50 to 100 160 · 200 250 315 · 350 400
Stability at Low Temperature Impedance
Z– 25°C / Z+20°C
—
—
—
—
—
—
—
—
ratio (MAX.)
Z– 40°C / Z+20°C
—
—
—
—
4
6
8 10
Z– 55°C / Z+20°C
4
3
3
2 ————
450 120Hz 15 — —
Endurance
Shelf Life Marking
Radial Lead Type
Sleeve (P.E.T.)
The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 5000 hours (2000 hours for φD=5 and 6.3, 3000 hours for φD=8) at 105°C, the peak voltage shall not exceed the rated voltage. After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the characteristic requirements listed at right. Printed with white color letter on dark brown sleeve.
Capacitance change Within ±20% of the initial capacitance value
tan δ
200% or less than the initial specified value
Leakage current
Less than or equal to the initial specified value
Capacitance change Within ±20% of the initial capacitance value
tan δ
150% or less than the initial specified value
Leakage current
Less than or equal to the initial specified value
Type numbering system (Example : 25V 470µF)
1 2 3 4 5 6 7 8 9 10 11 12
UPM 1 E 4 7 1 MPD
φd Size code
Configuration
Type
Code
Capacitance tolerance (± 20%) Rated capacitance (470µF)
Small Dia Low Profile
6
φD+0.5 MAX. P±0.5
Rated voltage (25V)
Series name
Pressure relief vent
(φ6.3up)
L+ MAX.
15MIN
4MIN
(φD < 10) 1.5 (φD >= 10) 2.0
(mm) φD 5 6.3 8 10 12.5 16 18 P 2.0 2.5 3.5 5.0 5.0 7.5 7.5 φd 0.5 0.5 0.6 0.6 0.6 0.8 0.8
In case L > 25 for the φ12.5 dia. unit, lead dia. φ d = 0.8mm.
Configur.