ALUMINUM ELECTROLYTIC CAPACITORS
ALUMINUM ELECTROLYTIC CAPACITORS
HV High Ripple Low Impedance series
Approved by Reliability Center for Electronic Comp...
Description
ALUMINUM ELECTROLYTIC CAPACITORS
HV High Ripple Low Impedance series
Approved by Reliability Center for Electronic Component, Japan-Certification No. RCJ-03-23C
Lower impedance at high frequency range. Smaller case size and high ripple current. Compliant to the RoHS directive (2002/95/EC).
HD
Smaller
HV
Specifications
ltem Performance Characteristics
Category Temperature Range – 40 to +105˚C
Rated Voltage Range
6.3 to 35V
Rated Capacitance Range
47 to 8200µF
Capacitance Tolerance
± 20% at 120Hz, 20˚C
Leakage Current
After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3 (µA), whichever is greater.
Rated voltage (V)
6.3 10 16 25 35 120Hz 20˚C
Tangent of loss angle (tan δ)
tan δ (MAX.)
0.21
0.18
0.15
0.13
0.11
For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF.
Rated voltage (V)
6.3 10 16 25 35 120Hz
Stability at Low Temperature Impedance ratio Z–25˚C / Z+20˚C
2
2
2
2
2
ZT / Z20 (MAX.) Z–40˚C / Z+20˚C
3
3
3
3
3
Endurance
The specifications listed at right shall be met when the capacitors are restored to 20˚C after D.C. bias plus rated ripple current is applied for 6000 hours (5000 hours for φD=5 and 6.3) at 105˚C, the peak voltage shall not exceed the rated voltage.
Capacitance change tan δ Leakage current
Within ± 25% of the initial capacitance value (6.3V 10V : ± 30%) 200% or less than the initial specified value Less than or equal to the initial specified value
Marking
P...
Similar Datasheet