ALUMINUM ELECTROLYTIC CAPACITORS
ALUMINUM ELECTROLYTIC CAPACITORS
GR Snap-in Terminal Type, 105°C Long Life Assurance series
Long life assurance series w...
Description
ALUMINUM ELECTROLYTIC CAPACITORS
GR Snap-in Terminal Type, 105°C Long Life Assurance series
Long life assurance series withstanding 10000 hours application of ripple current at 105°C. Compliant of the RoHS directive (2002/95/EC).
GR
Long Life GY
Specifications
Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current
Tangent of loss angle (tan δ)
Stability at Low Temperature
Performance Characteristics
– 40 to +105°C (200 250V) , – 25 to +105°C (400 450V)
200 to 450V
39 to 1500µF
± 20% at 120Hz, 20°C
I 3 CV (µA) (After 5 minutes' application of rated voltage) [C : Rated Capacitance (µF) V : Voltage (V)]
Measurement frequency : 120Hz, Temperature : 20°C
Rated voltage(V)
200 to 400
450
tan δ (MAX.)
0.15
0.20
Rated voltage (V)
Impedance ratio ZT/Z20 (MAX.)
Z– 25°C/ Z+20°C Z– 40°C/ Z+20°C
Measurement frequency : 120Hz
200 250
400 450
38 12 —
Endurance
The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 10000 hours at 105°C, the peak voltage shall not exceed the rated voltage.
Capacitance change tan δ Leakage current
Within ± 25% of the initial capacitance value 250% or less than the initial specified value Less than or equal to the initial specified value
Shelf Life
After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 a...
Similar Datasheet