ALUMINUM ELECTROLYTIC CAPACITORS
ALUMINUM ELECTROLYTIC CAPACITORS
GN Snap-in Terminal Type, 105°C Smaller-Sized series
Withstanding 3000 hours applicati...
Description
ALUMINUM ELECTROLYTIC CAPACITORS
GN Snap-in Terminal Type, 105°C Smaller-Sized series
Withstanding 3000 hours application of rated ripple current at 105°C. One rank smaller case sized than GU series. Addition of 500V rated voltage. Compliant to the RoHS directive (2002/95/EC).
GU
Smaller
GN
Smaller
Specifications
GG
Item
Performance Characteristics
Category Temperature Range
– 40 to +105°C (160 to 250V) , – 25 to +105°C (350 to 500V)
Rated Voltage Range
160 to 500V
Rated Capacitance Range
56 to 3300µF
Capacitance Tolerance
± 20% at 120Hz, 20°C
Leakage Current
I 3 CV(µA) (After 5 minutes' application of rated voltage) [C : Rated Capacitance (µF) V : Voltage (V)]
Tangent of loss angle (tan δ) Rated voltage (V) tan δ (MAX.)
160 to 420 0.15
450 to 500 0.20
Measurement frequency : 120Hz, Temperature : 20°C
Stability at Low Temperature
Rated voltage (V)
Impedance ratio ZT/Z20 (MAX.)
Z – 25°C/ Z+20°C
160 to 250 4
350 to 500 8
Measurement frequency : 120Hz Temperature : 20°C
Endurance
The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 3000 hours at 105°C, the peak voltage shall not exceed the rated voltage.
Capacitance change tan δ Leakage current
Within ± 20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value
Shelf Life Marking
After storing the capacitors under no load at 105°C f...
Similar Datasheet