Document
GSIB15A20 thru GSIB15A80
New Product
Vishay Semiconductors
formerly General Semiconductor
Single-Phase Single In-Line Bridge Rectifier
Features
Case Style GSIB-5S
30 ± 0.3 3.5 ± 0.2 4.6 ± 0.2 3.6 ± 0.2 3.2 ± 0.2
Reverse Voltage 200 to 800V Forward Current 15A
2.5 ± 0.2 2.2 ± 0.2
+
17.5 ± 0.5
4 ± 0.2
• Plastic package has Underwriters Laboratory Flammability Classification 94V-0 • This series is UL listed under Recognized Component Index, file number E54214. • High case dielectric strength of 2500 VRMS • Ideal for printed circuit boards • Glass passivated chip junction • High surge current capability • High temperature soldering guaranteed: 260°C/10 seconds, 0.375 (9.5mm) lead length, 5lbs. (2.3kg) tension
20 ± 0.3 5
11± 0.2
Mechanical Data
0.7 ± 0.1 2.7 ± 0.2
1± 0.1
7.5 7.5 10 ± 0.2 ± 0.2 ± 0.2
Dimensions in millimeters
Case: GSIB-5S Molded plastic body Terminals: Plated leads solderable per MIL-STD-750, Method 2026 Mounting Position: Any (Note 3) Mounting Torque: 8 in-lbs max. Weight: 0.26 oz., 7.0 g
(TA = 25°C unless otherwise noted)
Maximum Ratings & Thermal Characteristics
Parameter Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified output current at TC = 107°C TA = 25°C(2)
(1)
Symbol VRRM VRMS VDC IF(AV) IFSM I2t RθJA RθJC TJ, TSTG
GSIB 15A20 200 140 200
GSIB 15A40 400 280 400 15 3.5 200 166 22(2) 1.5(1)
GSIB 15A60 600 420 600
GSIB 15A80 800 560 800
Unit V V V A A A2sec °C/W °C
Peak forward surge current single sine-wave superimposed on rated load (JEDEC Method) Rating for fusing (t < 8.3ms) Maximum thermal resistance per leg Operating junction and storage temperature range
–55 to +150
Electrical Characteristics
Parameter
(TA = 25°C unless otherwise noted)
Symbol VF IR
GSIB 15A20
GSIB 15A40 1.00 10 250
GSIB 15A60
GSIB 15A80
Unit V µA
Maximum instantaneous forward voltage drop per leg at 7.5A Maximum DC reverse current at rated DC blocking voltage per leg TA = 25°C TA = 125°C
Notes: (1) Unit case mounted on Al plate heatsink. (2) Units mounted on P.C.B. without heatsink (3) Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with #6 screw
Document Number 88643 1-Dec-03
www.vishay.com 1
GSIB15A20 thru GSIB15A80
Vishay Semiconductors
formerly General Semiconductor
Ratings and Characteristic Curves (TA = 25°C unless otherwise noted)
Fig. 1 - Derating Curve Output Rectified Current
20 200
Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current Per Leg
Peak Forward Surge Current (A)
Average Forward Output Current (A)
15
Heat-Sink Mounting, TC
150
10
100
5 P.C.B. Mounting, TA 0 0 25 50 75 100 125 150
50 1.0 Cycle 0 1 10 100
T emperature (°C)
Number of Cycles at 60 HZ
Fig. 3 - Typical Forward Characteristics Per Leg
Instantaneous Forward Current (A)
100 1000.0
Fig. 4 - Typical Reverse Characteristics Per Leg
Instantaneous Reverse Current (µA)
Tj = 150°C TJ = 125°C .