DatasheetsPDF.com

UES1E102MHM Dataheets PDF



Part Number UES1E102MHM
Manufacturers Nichicon
Logo Nichicon
Description ALUMINUM ELECTROLYTIC CAPACITORS
Datasheet UES1E102MHM DatasheetUES1E102MHM Datasheet (PDF)

ALUMINUM ELECTROLYTIC CAPACITORS ES Bi-Polarized, For Audio Equipment series Bi-polarized “nichicon MUSE” acoustic series. Suited for audio signal circuits. Compliant to the RoHS directive (2002/95/EC). ES Bi-polarized FW Specifications Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current Tangent of loss angle (tan δ) Stability at Low Temperature Endurance Shelf Life Marking Performance Characteristics – 40 to +85°C 6.3 to 50V .

  UES1E102MHM   UES1E102MHM


Document
ALUMINUM ELECTROLYTIC CAPACITORS ES Bi-Polarized, For Audio Equipment series Bi-polarized “nichicon MUSE” acoustic series. Suited for audio signal circuits. Compliant to the RoHS directive (2002/95/EC). ES Bi-polarized FW Specifications Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current Tangent of loss angle (tan δ) Stability at Low Temperature Endurance Shelf Life Marking Performance Characteristics – 40 to +85°C 6.3 to 50V 0.47 to 1000µF ± 20% at 120Hz, 20°C After 1 minute's application of rated voltage, leakage current is not more than 0.03CV or 3 (µA), whichever is greater. Rated voltage (V) tan δ (MAX.) 6.3 0.24 10 0.20 16 0.16 Measurement frequency : 120Hz, Temperature : 20°C 25 35 50 0.16 0.14 0.12 Measurement frequency : 120Hz Rated voltage (V) 6.3 10 16 25 35 50 Impedance ratio Z– 25°C / Z+20°C 4 3 2 2 2 2 ZT / Z20 (MAX.) Z– 40°C / Z+20°C 8 6 4 4 4 4 The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 85°C with the polarity inverted every 250 hours. Capacitance change tan δ Leakage current Within ±20% of the initial capacitance value 150% or less than the initial specified value Less than or equal to the initial specified value After storing the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Printed with black color letter on clear green sleeve. Radial Lead Type Type numbering system (Example : 10V 47µF) Sleeve (P.E.T.) φd 1 2 3 4 5 6 7 8 9 10 11 UES 1 A 4 7 0 MEM φD+0.5 MAX. P±0.5 Pressure relief vent (φ6.3up) L+ MAX. 15MIN 4MIN • Please refer to page 20 about the end seal configulation. Dimensions Cap.(µF) 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 330 470 1000 V Code R47 010 2R2 3R3 4R7 100 220 330 470 101 221 331 471 102 6.3 0J 5 × 11 6.3 × 11 8 × 11.5 10 × 12.5 10 × 16 10 × 20 12.5 × 25 (mm) φD 5 6.3 8 10 12.5 16 P 2.0 2.5 3.5 5.0 5.0 7.5 φd 0.6 0.6 0.6 0.6 0.8 0.8 (φD < 10) 1.0 (φD 10) 1.5 10 16 1A 1C 5 × 11 6.3 × 11 6.3 × 11 10 × 12.5 10 × 16 10 × 20 12.5 × 20 16 × 25 5 × 11 6.3 × 11 6.3 × 11 8 × 11.5 10 × 12.5 10 × 20 12.5 × 20 12.5 × 25 16 × 25 25 1E 5 × 11 5 × 11 6.3 × 11 8 × 11.5 10 × 12.5 10 × 16 12.5 × 25 12.5 × 25 16 × 25 16 × 31.5 Configuration Capacitance tolerance ( ± 20%) φD Code 5 DM Rated capacitance (47µF) 6.3 EM Rated voltage (10V) 8 · 10 PM 12.5 · 16 HM Series name Type 35 1V 5 × 11 6.3 × 11 8 × 11.5 10 × 12.5 10 × 12.5 10 × 20 12.5 × 25 16 × 25 16 × 25 φ D × L (mm) 50 1H 5 × 11 5 × 11 5 × 11 5 × 11 6.3 × 11 8 × 11.5 10 × 12.5 10 × 16 10 × 20 12.5 × 25 16 × 25 16 × 31.5 Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. CAT.8100Z .


UES1E102MEM UES1E102MHM UES1E220MEJ


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)