Document
ALUMINUM ELECTROLYTIC CAPACITORS
AS Wide Temperature Range, Miniature Type Permissible Abnormal Voltage series
Improved safety feature for abnormally excessive voltage. High ripple current product. Compliant to the RoHS directive (2002/95/EC).
AQ
Smaller
AS
Specifications
Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current
Performance Characteristics
– 40 to +105°C 200V 33 to 330µF ± 20% at 120Hz, 20°C After 1 minute's application of rated voltage, leakage current is 0.04CV+100 (µA) or less.
Tangent of loss angle (tan δ) Rated voltage (V) tan δ (MAX.)
200 0.15
Measurement frequency:120Hz, Temperature:20°C
Stability at Low Temperature
Rated voltage (V)
Impedance ratio ZT / Z20 (MAX.)
Z– 25°C / Z+20°C Z– 40°C / Z+20°C
200 Measurement frequency : 120Hz 3 6
Endurance
The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 2000 hours at 105°C, the peak voltage shall not exceed the rated voltage.
Capacitance change tan δ Leakage current
Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value
Shelf Life
After leaving capacitors under no load at 105°C for 1000 hours they shall meet the specified values for the endurance characteristics listed above.
Safety Performance Marking
The pressure relief vent will operate in normal conditions, with no dangerous conditons such as flames, ignitions or dispersion of pieces of the capacitor and / or case.
voltage (V)
200 Printed with white color letter on dark brown sleeve.
Limited DC current 4A (5A : 330µF)
Test conditions
Test Voltage 300VDC and 375VDC
Radial Lead Type
Type numbering system (Example : 200V 220µF)
Sleeve (P.E.T.)
φd
φD+0.5 MAX. P±0.5
Pressure relief vent
L+ 2.0MAX.
15MIN
4MIN
• Please refer to page 20 about the end seal configulation.
(mm)
φD 10 12.5 16 18 P 5.0 5.0 7.5 7.5
φd 0.6 0.6 0.8 0.8 In case L>25 for φ12.5 (D) case sizes, lead diameter φ0.8 (d) will be applied.
Dimensions
1 2 3 4 5 6 7 8 9 10 11 12
UA S 2 D 2 2 1 MHD
Configuration
φD
Pb-free leadwire Pb-free PET sleeve
10 PD
12.5 to 18
HD
Size code Configuration Capacitance tolerance (±20%) Rated capacitance (220µF) Rated voltage (200V)
Series name Type
Cap.(µF) 33 47 56 68 82
100 150 180 220 270 330
V
Code
φD
330
470
560
680
820
101
151
181
221
271
331
φ10 10 × 20 10 × 25
160 195
φ12.5
200 (2D)
φ16
φ18
Case size φ D × L (mm) Rated ripple
12.5 × 20
195
12.5 × 20
210
12.5 × 25
320
12.5 × 25 12.5 × 31.5
360 430
16 × 20 16 × 25
430 460
18 × 20
460
16 × 31.5
600
18 × 25
600
18 × 31.5
710
18 × 35.5
890
18 × 40
910
Frequency coefficient of rated ripple current
Frequency 50, 60Hz 120Hz
Coefficient 0.80
1.00
300Hz 1.25
1kHz 10kHz or more 1.40 1.60
Rated ripple current (mArms) at 105°C 120Hz : In this case, 6 will be put at.
Similar Datasheet