CRG1206

Key Features n Thick film resistors with a high power to size ratio,ideally suited to industrial and general purpose use. A range from 1 ohm to 10M and tolerances of 1% and 5%. Also including zero ohm links. n Suitable for most applications, including high frequency operation, owing to the short lead structure and low capacitance. n Seven Package Sizes n Terminal finish: Matte Sn n MSL Level 2 Thick Film Chip Resistors Type CRG Series Precious metal terminations are screen printed onto a ceramic base and fired. The resistive element is screen printed and fired and the passivation layer added. Each resistor is trimmed to tolerance by laser. The pre-scribed tile is broken into strips, the end plating is fired on and the strips broken into individual components. Final termination is made by electroplating. Characteristics – Electrical Rated Power @ 70 °C (W) Resistance Range Min (Ohms) Max Tolerance (%) Code letter Selection Series Temp. Coefficient (ppm/°C) 10 1M0 1 F E24 E96 ±200 0201 0.05 1 10 5 J E24 ±400 11 1M0 5 J E24 ±200 0402 0603 0805 0.063 0.1 0.125 10 1 11 1 101 1 11 1 101 1 11 2M0 10 3M3 100 1M0 10 10M 100 1M0 10 10M 1 5 5 1 15 5115 5 F J J FFJ JFFJ J E24 E24 E24 E24 E24 E24 E24 E24 E24 E24 E24 E96 E96 E96 ±100 ±400 ±200 ±200 ±100 ±200 ±200 ±200 ±100 ±400 ±200 Rated Power @ 70 °C (W) Resistance Range Min Ohms Max Tolerance (%) Code letter Selection Series Temp. Coefficient (ppm/°C) 1 100 1 F E24 ±200 1206 0.25 101 1 1M0 10 15 FJ E...