Variable Attenuator
AMMP-6650 DC – 30 GHz Variable Attenuator
Data Sheet
Description
The AMMP-6650 is a voltage controlled variable attenu...
Description
AMMP-6650 DC – 30 GHz Variable Attenuator
Data Sheet
Description
The AMMP-6650 is a voltage controlled variable attenuator in a surface mount package, designed to operate from DC to 30 GHz. It is fabricated using Avago Technologies enhancement mode pHEMT MMIC process and requires only positive voltage control. The distributed topology of the AMMP-6650 facilitates broadband operation by absorbing parasitic effects of its series and shunt FETs. An on-chip DC reference circuit may be used to maintain optimum VSWR for any attenuation setting or to provide more linear attenuation versus voltage response.
Package Diagram
DCin NC DCout
1
2
3
RFin 8
4 RFout
7
6
5
V1 NC V2
Features
5 x 5 mm Surface Mount Package Wide Frequency Range DC - 30 GHz Attenuation Range 20dB Single Positive Bias Supply Unconditionally Stable
Applications
Microwave Radio Systems Satellite VSAT, DBS Up / Down Link LMDS & Pt – Pt mmW Long Haul Broadband Wireless Access (including 802.16 and 802.20
WiMax) WLL and MMDS loops
Functional Block Diagram
DCin NC DCout
1
2
3
RFin 8
DC reference circuit
variable attenuator
7
6
5
V1 NC V2
Top View
Note : Package base : GND
Pin Function 1 DC in 2 NC 3 DC out
4 RFout 4 RF out 5 V2 6 NC 7 V1 8 RF in
Attention: Observe precautions for handling electrostatic sensitive devices. ESD Machine Model = 80 V ESD Human Body Model = 400 V Refer to Avago Application Note A004R: Electrostatic Discharge, Damage and Control.
Note: MSL Rating...
Similar Datasheet