Piezo Audio Indicator
A. SCOPE
This specification applies piezo audio indicator, KPEG243 , KPEG243
B. SPECIFICATION
No. Item
1 Operating Fr...
Description
A. SCOPE
This specification applies piezo audio indicator, KPEG243 , KPEG243
B. SPECIFICATION
No. Item
1 Operating Frequency 2 Operating Volt. range 3 Current consumption 4 Sound pressure level 5 Rated Voltage 6 Tone 7 Operating temp. 8 Storage temp. 9 Dimension 10 Weight (MAX) 11 Material 12 Terminal
Environmental 13 Protection Regulation
Unit
KHz VDC mA dB VDC
mm gram
Specification
5.0 ± 0.5 9 ~ 16 MAX 35 MIN 80
12 Continuous
-30~ + 85 -40 ~ +95 14.0 x H9.5
10.0 ABS UL-94 1/16” HB HIGH HEAT
BLACK Wire type
RoHS
C. APPEARANCE DRAWING
Condition
at 12VDC at 30cm/12VDC
at 12VDC
See appearance drawing
See appearance drawing
Tol: ± 0.5 Unit: mm
KINGSTATE ELECTRONICS CORP 2/5 KPEG243
D. MEASURING METHOD
S.P.L. Measuring Circuit
Mic : RION S.P.L meter UC30 or equivalent
Mic RION
UC30
S.G Hewlett Packard 33120A Function Generator or equivalent
S.G Hewlett Packard 33120A
E. VOLTAGE: SOUND PRESSURE LEVEL / VOLTAGE: CURRENT CONSUMPTION
CHARACTERISTICS
/
KINGSTATE ELECTRONICS CORP 3/5 KPEG243
F. MECHANICAL CHARACTERISTICS
No. Item
Test Condition
Evaluation standard
Solderability
90% min. stripped wires shall Stripped wires of lead wires are immersed in rosin for 5 seconds and then be wet with solder.(Except the
1
immersed in solder bath of +270±5 for 3±0.5 seconds.
(Connector excepted) ()
5 , +270±5
3±0.5 .
edge of terminal) .( )
90%
The pull force shall be applied to double lead wire
Lead Wire Pull Horizontal 3.0N(0.306kg) for 30 seconds.
2
Strength
...
Similar Datasheet