MIC22205
2A, Integrated, Switch, High-Efficiency, Synchronous Buck Regulator with
Frequency Programmable up to 4MHz
Gen...
MIC22205
2A, Integrated, Switch, High-Efficiency, Synchronous Buck
Regulator with
Frequency Programmable up to 4MHz
General Description
The Micrel MIC22205 is a high-efficiency, 2A, integrated switch, synchronous buck (step-down)
regulator. The MIC22205 is optimized for highest efficiency, achieving more than 95% efficiency while still switching at 1MHz. The ultra-high speed control loop keeps the output voltage within regulation even under the extreme transient load swings commonly found in FPGAs and low-voltage ASICs. The output voltage is pre-bias safe and can be adjusted down to 0.7V to address all low-voltage power needs.
The MIC22205 offers a full range of sequencing and tracking options. The Enable/Delay (EN/DLY) pin, combined with the Power Good (PG) pin, allows multiple outputs to be sequenced in any way during turn-on and turn-off. The Ramp Control™ (RC) pin allows the device to be connected to another product in the MIC22xxx and/or MIC68xxx family, to keep the output voltages within a certain ∆V on start-up.
The MIC22205 is available in a 12-pin 3mm x 3mm MLF® with a junction operating range from –40°C to +125°C.
Data sheets and support documentation can be found on Micrel’s web site at: www.micrel.com.
Features
Input voltage range: 2.9V to 5.5V Output voltage adjustable down to 0.7V Output load current up to 2A Safe start-up into a pre-biased output Full sequencing and tracking capability Power Good (PG) output Efficiency > 95% across a broad load ...