DatasheetsPDF.com

T-51512D121J-FW-A-AC Dataheets PDF



Part Number T-51512D121J-FW-A-AC
Manufacturers OPTREX
Logo OPTREX
Description LCD Module
Datasheet T-51512D121J-FW-A-AC DatasheetT-51512D121J-FW-A-AC Datasheet (PDF)

Type No. LCD Module Technical Specification T-51512D121J-FW-A-AC First Edition Sep 30, 2004 Final Revision * Approved by (Quality Assurance Division) Checked by (ACI Engineering Division) M.Noguchi Prepared by (ACI Engineering Division) No. Item -- CONTENTS 1 APPLICATION 2 OVERVIEW 3 ABSOLUTE MAXIMUM RATINGS 4 ELECTRICAL CHARACTERISTICS 5 INTERFACE PIN CONNECTION 6 INTERFACE TIMING 7 BLOCK DIAGRAM 8 MECHANICAL SPECIFICATION 9 OPTICAL CHARACTERISTICS 10 RELIABILITY TEST CONDITION 11 INS.

  T-51512D121J-FW-A-AC   T-51512D121J-FW-A-AC


Document
Type No. LCD Module Technical Specification T-51512D121J-FW-A-AC First Edition Sep 30, 2004 Final Revision ****** Approved by (Quality Assurance Division) Checked by (ACI Engineering Division) M.Noguchi Prepared by (ACI Engineering Division) No. Item -- CONTENTS 1 APPLICATION 2 OVERVIEW 3 ABSOLUTE MAXIMUM RATINGS 4 ELECTRICAL CHARACTERISTICS 5 INTERFACE PIN CONNECTION 6 INTERFACE TIMING 7 BLOCK DIAGRAM 8 MECHANICAL SPECIFICATION 9 OPTICAL CHARACTERISTICS 10 RELIABILITY TEST CONDITION 11 INSPECTION STANDARDS 12 HANDLING PRECAUTIONS FOR TFT-LCD MODULE -- PACKAGING SPECIFICATION -- PRODUCTS NUMBER LABELING FORMS -- LAMP UNIT FOR 12.1” SVGA Page 1 2 3 4 4 7 9 12 13 15 17 18 19 22 26 28 T-51512D121J-FW-A-AC (AC) No. 2004-0135 OPTREX CORPORATION Page 1/33 1. APPLICATION This specification applies to color TFT-LCD module, T-51512D121J-FW-A-AC. These specification papers are the proprietary product of OPTREX and include materials protected under copyright of OPTREX. No part of this document may be reproduced in any form or by any means without the express written permission of OPTREX. OPTREX does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a product specified in this document. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of OPTREX or of others. OPTREX classifies the usage of the TFT-LCD module as follows. Please confirm the usage before using the product. (1) Standard Usage Computers, office equipment, factory automation equipment, test and measurement equipment, communications (2) Special Usage Transportation equipment(automobiles, ships, trains, etc.), medical equipment, safety equipment (3) Specific Usage Cockpit Equipment, military systems, aerospace equipment, nuclear reactor control systems, life support systems and any other equipment. OPTREX should make a contract that stipulate apportionment of responsibilities between OPTREX and our customer. The product specified in this document is designed for “Standard Usage” unless otherwise specified in this document. If customers intend to use the product for applications other than those specified for “Standard Usage”, they should contact OPTREX sales representative in advance. OPTREX has been making continuous effort to improve the reliability of its products. Customers should implement sufficient reliability design of their application equipments such as redundant system design, fail-safe functions, anti-failure features. OPTREX assumes no responsibility for any damage resulting from the use of the product that does not comply with the instructions and the precautions specified in this document. Please contact and consult a OPTREX sales representative for any questions regarding this product. T-51512D121J-FW-A-AC (AC) No. 2004-0135 OPTREX CORPORATION Page 2/33 2. OVERVIEW T-51512D121J-FW-A-AC is 12.1” color TFT-LCD (Thin Film Transistor Liquid Crystal Display) module composed of LCD panel, driver ICs, control circuit, and backlight unit. By applying 6 bit digital data, 800 × 600, 260 K-color images are displayed on the 12.1” diagonal screen. Input power voltage is single 3.3V or 5.0V for LCD driving. Both 3.3 V-CMOS and 5.0 V-CMOS level voltage are acceptable for logic input voltage. Inverter for backlight is not included in this module. General specifications are summarized in the following table: ITEM Display Area (mm) Number of Dots Pixel Pitch (mm) Color Pixel Arrangement Display Mode Number of Color Optimum Viewing Angle(Contrast ratio) Brightness (cd/m2) Module Size (mm) Module Mass (g) SPECIFICATION 246.0 × 184.5 (12.106-inch diagonal) 800 × 3 (H) × 600 (V) 0.3075 (H) × 0.3075 (V) RGB vertical stripe normally white 260 K 6 o’clock 400 280.0 (W) × 210.0 (H) × 12.0 (D) 720 Backlight Unit Surface Treatment CCFL, 2-tubes, edge-light, replaceable Antireflection and hard-coating 2H Characteristic value without any note is typical value. T-51512D121J-FW-A-AC (AC) No. 2004-0135 OPTREX CORPORATION Page 3/33 3. ABSOLUTE MAXIMUM RATINGS ITEM SYMBOL MIN. MAX UNIT Power Supply Voltage for LCD VCC 0 6.0 V Logic Input Voltage VI 0 6.5 V Lamp Voltage VL 0 2000 Vrms Lamp Current IL 0 18 mArms Lamp Frequency FL -- 80 kHz Operation Temperature(Panel) Note 1,2) Top(Panel) 0 60 °C Operation Temperature(Ambient) Note 2) Top(Ambient) 0 60 °C Storage Temperature Note 2) Tstg -20 70 °C [Note] 1) Measured at the center of active area and at the center of panel back surface 2) Top,Tstg ≤ 40°C : 90%RH max. without condensation Top,Tstg > 40°C : Absolute humidity shall be less than the value of 90%RH at 40°C without condensation. 4. ELECTRICAL CHARACTERISTICS (1) TFT-LCD ITEM Power Supply Voltage for LCD 3.3V powered 5.0V powered Power Supply 3.3V powered Current for LCD 5.0V powered Permissive Input Ripple Voltage Logic Input Voltage Hig.


STC12LE5630AD T-51512D121J-FW-A-AC LTM121S1-T01


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)