DatasheetsPDF.com

LGU1C273MELB Dataheets PDF



Part Number LGU1C273MELB
Manufacturers Nichicon
Logo Nichicon
Description ALUMINUM ELECTROLYTIC CAPACITORS
Datasheet LGU1C273MELB DatasheetLGU1C273MELB Datasheet (PDF)

ALUMINUM ELECTROLYTIC CAPACITORS GU Snap-in Terminal Type, 105°C Standard series Withstanding 3000 hours application of rated ripple current at 105°C. Compliant to the RoHS directive (2011/65/EU). GW High Lipple Current GU Smaller Low Profile GN GJ Specifications Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current Tangent of loss angle (tan δ) Stability at Low Temperature Performance Characteristics – 40 to + 105°C (16 to 25.

  LGU1C273MELB   LGU1C273MELB



Document
ALUMINUM ELECTROLYTIC CAPACITORS GU Snap-in Terminal Type, 105°C Standard series Withstanding 3000 hours application of rated ripple current at 105°C. Compliant to the RoHS directive (2011/65/EU). GW High Lipple Current GU Smaller Low Profile GN GJ Specifications Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current Tangent of loss angle (tan δ) Stability at Low Temperature Performance Characteristics – 40 to + 105°C (16 to 250V) , – 25 to +105°C (315 to 450V) 16 to 450V 47 to 47000µF ± 20% at 120Hz, 20°C I 3 CV(µA) (After 5 minutes' application of rated voltage) [C : Rated Capacitance (µF) V : Voltage (V)] Measurement frequency : 120Hz at 20°C Rated voltage(V) tan δ (MAX.) 16 0.50 25 0.40 35 0.35 50 0.30 63 0.25 80 • 100 160 to 420 0.20 0.15 450 0.20 Rated voltage (V) Impedance ratio ZT/Z20 (MAX.) Z – 25°C/ Z+20°C Z – 40°C/ Z+20°C Measurement frequency : 120Hz 16 to 100 4 160 to 250 3 20 12 315 to 450 8 — Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 3000 hours at 105°C, the peak voltage shall not exceed the rated voltage. Capacitance change tan δ Leakage current Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Shelf Life Marking After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the characteristic requirements listed at right. Printed with white color letter on black sleeve. Capacitance change tan δ Leakage current Within ±15% of the initial capacitance value 150% or less than the initial specified value Less than or equal to the initial specified value Drawing Polarity bar Sleeve (P.E.T.) L±2 Pressure relief vent 4.0 ± 0.5 10 ±0.1 10 0.8 +0.2 -0.1 0.8+-00..21 Type numbering system (Example : 200V 680µF) 1 2 3 4 5 6 7 8 9 10 11 12 LGU 2 D 6 8 1 ME L A Configuration Capacitance tolerance (±20%) Rated capacitance (680µF) Rated voltage (200V) Series name Type Case dia. code φD Code 20 Y 22 Z 25 A 30 B 35 C φD +1MAX. 4.0± 0.5 2.5 2-2φ±0.1 (PC board hole dimensions) 1.5 +0.2 -0.1 (Terminal dimensions) The other terminal is also available upon request. Please refer page 328 for schematic of dimensions. Frequency coefficient of rated ripple current Frequency (Hz) 50 60 120 300 1k 10k 50k or more 16 to 100V 0.88 0.90 1.00 1.07 1.15 1.15 1.15 Coeff. 160 to 250V 0.81 0.85 1.00 1.17 1.32 1.45 315 to 450V 0.77 0.82 1.00 1.16 1.30 1.41 1.50 1.43 Minimum order quantity : 50pcs. Dimension table in next page. CAT.8100C ALUMINUM ELECTROLYTIC CAPACITORS GU series Dimensions Cap. (µF) 6800 8200 10000 12000 15000 18000 22000 27000 33000 39000 47000 Size φD ×L (mm) 22 × 25 22 × 30 22 × 30 25 × 25 22 × 35 25 × 30 .


LGU1C273MELA LGU1C273MELB LGU1C273MELC


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)