Document No.: FT_000060
FT4232H QUAD HIGH SPEED USB TO MULTIPURPOSE UART/MPSSE IC
Datasheet Version 2.07
Clearance No.: FTDI#78
3.4.2 FT4232H pins used in a Synchronous or Asynchronous Bit-Bang Interface
The FT4232H channel A,B,C or channel D can be configured as a bit-bang interface. There are two types
of bit-bang modes: synchronous and asynchronous.
When configured in any bit-bang mode (synchronous or asynchronous), the pins used and the
descriptions of the signals are shown in Table 3.6
Channel
Number
Pin Nos.
Name
Type
Synchronous or Asynchronous Bit-Bang
Configuration Description
A 24,23,22,21,
ADBUS[7:0]
I/O Channel A, D7 to D0 bidirectional bit-bang data
19,18,17,16
B 34,33,32,30,
BDBUS[7:0]
I/O Channel B, D7 to D0 bidirectional bit-bang data
29,28,27,26
C 46,45,44,43,
CDBUS[7:0]
I/O Channel C, D7 to D0 bidirectional bit-bang data
41,40,39,38
D 59,58,57,55
DDBUS[7:0]
I/O Channel D, D7 to D0 bidirectional bit-bang data
54,53,52,48
Table 3.6 Channel A,B,C and Channel D Synchronous or Asynchronous Bit-Bang Configured Pin
Descriptions
For a functional description of this mode, please refer to section 4.5 Synchronous and Asynchronous Bit-
Bang Interface Mode Description.
Copyright © 2010 Future Technology Devices International Limited
13
