Document
Hall Effect Current Sensors L06P***S05 Series
Features:
• • • • • • • Open Loop type Printed circuit board mounting Horizontal mounting Unipolar power supply Industrial temperature range Mounting pins Insulated plastic case according to UL94V0
Advantage:
• • • • • • • • Excellent accuracy and linearity Wide nominal current range Low temperature drift Wide frequency bandwidth No insertion loss High Immunity To External Interference Optimised response time Current overload capability
TA=25ºC, VCC=+5V, RL=10kΩ
Specifications
Parameters Rated current Maximum Current Output Voltage Offset Voltage1 Accuracy
2
Symbol If Ifmax VOUT VOE X
L06P300S05 300AT
L06P400S05 400AT
L06P500S05 500AT
L06P600S05 600AT
L06P700S05 700AT
L06P800S05 800AT
≥ If x 1.33 VOE ± 1.5V @ ± If VREF ± 30mV @ If = 0A < 1% @ If ≤ ± 1% @ If + 5V ±2 % ≤ 15mA ≤ 5µs (@ di/dt = 100A / µs) ≤ ± 1.5mV/ºC ≤ ± 1.0 mV/ºC @ If = 0A ≤ 10mV (0A ⇔ If) AC2500V for 1minute (sensing current 0.5mA), inside of aperture ⇔ terminal > 500MΩ (500V DC), inside of aperture ⇔ terminal DC .. 50kHz -40ºC~+85ºC -40ºC~+85ºC
Output Linearity2 Power Supply Current Consumption Response Time3 Output Temperature Characteristic2 Offset Temperature Characteristic Hysteresis error Withstand Voltage Insulation Resistance Frequency Bandwidth
4
εL
VCC IC tr TCVOUT TCVOE VOH Vd RIS f TA TS
Operating Temperature Storage Temperature
1 VREF = VCC / 2 (ratiometric) — 2 Without offset — 3 Time between 10% input current full scale and 90% of sensor output full scale — 4 Small signal only to avoid excessive heating of magnetic core
Electrical Performances
Frequency Characteristic (L06P400S05)
2,0
Saturation Characteristic (LO6P400S05)
5,0
Attenuation (dB)
0,0 -2,0 -4,0 -6,0 -8,0 -10,0 0,1 1 10 100
Output Voltage (V)
4,0 3,0 2,0 1,0 0,0 -800 -600 -400 -200 0 200 400 600 800
If frequency (kHz) @ If=3.0Arms x 10T
Input current (A)
L06PXXXS05revD, March 2009
Tamura reserve the right to modify its products in order to improve them without prior notice
Hall Effect Current Sensors L06P***S05 Series
Mechanical dimensions in mm
Electrical connection diagram
-If
+If 321
Terminal Pin Identification 1: Output 2: GND 3: +VCC
VOUT + VCC RL = 10kΩ GND
Package & Weight Information
Weight 66g Pcs/box 100 Pcs/carton 500 Pcs/pallet 9000
L06PXXXS05revD, March 2009
Tamura reserve the right to modify its products in order to improve them without prior notice
.