TURBO 2 ULTRAFAST HIGH VOLTAGE RECTIFIER
STTH1L06
Turbo 2 ultrafast high voltage rectifier
Features
■ Ultrafast switching ■ Low reverse recovery current ■ Reduc...
Description
STTH1L06
Turbo 2 ultrafast high voltage rectifier
Features
■ Ultrafast switching ■ Low reverse recovery current ■ Reduces switching and conduction losses ■ Low thermal resistance
Description
The STTH1L06/U/A, which is using ST Turbo 2 600 V technology, is specially suited as boost diode in discontinuous or critical mode power factor corrections. The device is also intended for use as a free wheeling diode in power supplies and other power switching applications.
DO-41 STTH1L06
SMB STTH1L06U
SMA STTH1L06A
Table 1. Device summary Symbol
IF(AV) VRRM IR (max) Tj (max) VF (max) trr (max)
Value 1A
600 V 75 µA 175 °C 1.05 V 80 ns
October 2009
Doc ID 8321 Rev 4
1/9
www.st.com
9
Characteristics
1
Characteristics
STTH1L06
Table 2. Absolute ratings (limiting values)
Symbol
Parameter
VRRM Repetitive peak reverse voltage IF(RMS) Forward rms voltage
DO-41 SMA / SMB
IF(AV)
IFSM Tstg Tj
DO-41
Tc = 120 °C
Average forward current δ = 0.5 SMA
Tc = 135 °C
SMB
Tc = 145 °C
Surge non repetitive forward current
tp = 10 ms sinusoidal DO-41 tp = 10 ms sinusoidal SMA / SMB
Storage temperature range
Maximum operating junction temperature
Table 3. Symbol
Thermal parameters
Rth(j-l) Junction to lead
Parameter
L = 10 mm
Rth(j-a) Junction to ambient (1)
L = 10 mm
1. Rth(j-a) is measured with a copper area S = 5 cm2 (see Figure 14.)
DO-41 SMA SMB DO-41
Table 4. Static electrical characteristics
Symbol
Parameter
Test conditions
Min.
IR Reverse leakage current VF F...
Similar Datasheet