Document
AMP DISPLAY INC.
SPECIFICATIONS
CUSTOMER CUSTOMER PART NO. AMP PART NO. APPROVED BY DATE
Approved For Specifications Approved For Specifications & Sample
9856 SIXTH STREET RANCHO CUCAMONGA CA TEL: 909-980-13410 FAX: 909-980-1419 WWW.AMPDISPLAY.COM
AM-320240N1TMQW-00HF(R)
AMP DISPLAY INC
91730
APPROVED BY
CHECKED BY
ORGANIZED BY
Date : 2012/05/02
1
RECORD OF REVISION
Revision Date Page 2010/9/13 2011/12/21 2012/04/23 9 3 Contents New Release Change Optical characteristic Added ATR Polarizer characteristics Editor
Kevin Titan Titan
Date: 2012/04/23
2
1 Features
5.7 inch Amorphous-TFT-LCD (Thin Film Transistor Liquid Crystal Display) module. This module is composed of a 5.7” TFT-LCD panel, a driver circuit and backlight unit. (1) Construction: 5.7” a-Si color TFT-LCD, White LED Backlight and PCB. (2) Resolution (pixel): 320(R.G.B) X240 (3) Number of the Colors : 262K colors ( R , G , B 6 bit digital each) (4) LCD type : Transmissive Color TFT LCD ( normally White) (5) Interface: 40 pin (6) Power Supply Voltage: 3.3V single power input. Built-in power supply circuit. (7) Viewing Direction: 6 O’clock ( The direction it’s hard to be discolored ) (8) High outdoor readability by ATR technology. (9) Hard coat & Low-Reflection & Anti-Static (10) Reflective ratio 0.5% ~ 2%
2 Physical specifications
Item Display resolution(dot) Active area Screen size Pixel size Color configuration Overall dimension Weight Backlight unit Specifications 960 (W) x 240(H) 115.2 (W) x 86.4 (H) 5.7(Diagonal) 120 (W) x 360 (H) R.G.B stripe 167.0(W)x109.0(H)x8.9(D) T.B.D LED Unit mm mm mm um mm mg
3 Electrical specification
3.1 Absolute max. ratings 3.1.1 Electrical Absolute max. ratings Item Power voltage
Input voltege
Symbol Condition VDD Vin VSS=0
Min. -0.3 -0.3
Max. 6.0 VDD+0.3
Unit V V
Remark
Note 1
Note1:Hsync, Vsync, DEN, DCLK, R0~R5, G0~G5, B0~B5
Date: 2012/04/23
3
3.1.2 Environmental Absolute max. ratings OPERATING STORAGE Item MIN MAX MIN MAX Temperature Humidity Corrosive Gas -20 Note1 Not Acceptable 70 -30 Note1 Not Acceptable 80
Remark Note2,3,4,5,6,7,8
Note1 : Ta <= 40℃ : 85% RH max Ta > 40℃ : Absolute humidity must be lower than the humidity of 85%RH at 40℃ Note2 : For storage condition Ta at -30℃ < 48h , at 80℃ < 100h For operating condition Ta at -20℃ < 100h Note3 : Background color changes slightly depending on ambient temperature. This phenomenon is reversible. Note4 : The response time will be slower at low temperature. Note5 : Only operation is guarantied at operating temperature. Contrast , response time, another display quality are evaluated at +25℃ Note6 : When LCM is operated over 40℃ ambient temperature, the ILED of the LED back-light should be follow : Allowable Forward Current IF (mA) 175 140 105 70 35 -20 -10 0 10 20 30 40 50 60 70
Ambient Temperature Ta (℃) Note7 : This is panel surface temperature, not ambient temperature. Note8 : When LCM be operated over than 40℃ , the life time of the LED back-light will be reduced.
.