Hex 3-State Noninverting Buffer with Common Enables
SL74HC365
Hex 3-State Noninverting Buffer with Common Enables
High-Performance Silicon-Gate CMOS
The SL74HC365 is ident...
Description
SL74HC365
Hex 3-State Noninverting Buffer with Common Enables
High-Performance Silicon-Gate CMOS
The SL74HC365 is identical in pinout to the LS/ALS365. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LS/ALSTTL outputs. This device is a high-speed hex buffer with 3-state outputs and two common active-low Output Enables. When either of the enables is high, the buffer outputs are placed into high-impedance states. The SL74HC365 has noninverting outputs. Outputs Directly Interface to CMOS, NMOS, and TTL Operating Voltage Range: 2.0 to 6.0 V Low Input Current: 1.0 µA High Noise Immunity Characteristic of CMOS Devices
ORDERING INFORMATION SL74HC365N Plastic SL74HC365D SOIC TA = -55° to 125° C for all packages
PIN ASSIGNMENT LOGIC DIAGRAM
FUNCTION TABLE
Inputs Enable 1 L L PIN 16 =VCC PIN 8 = GND H X Enable 2 L L X H A L H X X Output Y L H Z Z
Z = high impedance X = don’t care
SLS
System Logic Semiconductor
SL74HC365
MAXIMUM RATINGS *
Symbol VCC VIN VOUT IIN IOUT ICC PD Tstg TL
*
Parameter DC Supply Voltage (Referenced to GND) DC Input Voltage (Referenced to GND) DC Output Voltage (Referenced to GND) DC Input Current, per Pin DC Output Current, per Pin DC Supply Current, VCC and GND Pins Power Dissipation in Still Air, Plastic DIP+ SOIC Package+ Storage Temperature Lead Temperature, 1 mm from Case for 10 Seconds (Plastic DIP or SOIC Package)
Value -0.5 to +7.0 -1.5 to VCC +1.5 -0.5 to VCC +0.5 ±20 ±35 ±7...
Similar Datasheet