MX29SL402CT

MX29SL402C T/B 4M-BIT [512K x 8 / 256K x 16] SINGLE VOLTAGE 1.8V ONLY FLASH MEMORY FEATURES GENERAL FEATURES Single Power Supply Operation - 1.65 to 2.2 volt for read, erase, and program operations 524,288 x 8 / 262,144 x 16 switchable Boot Sector Architecture - T = Top Boot Sector - B = Bottom Boot Sector Sector Structure - 16K-Byte x 1, 8K-Byte x 2, 32K-Byte x 1, and 64K-Byte x 7 Sector protection - Hardware method to disable any combination of sectors from program or erase operations - Temporary sector unprotected allows code changes in previously locked sectors Latch-up protected to 100mA from -1V to Vcc + 1V Compatible with JEDEC standard - Pinout and software compatible to single power supply Flash PERFORMANCE High Performance - Access time: 90ns - Byte/Word program time: 12us/18us (typical) - Erase time: 1.3s/sector, 9s/chip (typical) Low Power Consumption - Low active read current: 6mA (maximum) at 5MHz - Low standby current: 1uA (typical) Typical 100,000 erase/program cycle 10 years data retention SOFTWARE FEATURES Erase Suspend/ Erase Resume - Suspends sector erase operation to read data from or program data to another sector which is not being erased Status Reply - Data# Polling & Toggle bits provide detection of program and erase operation completion Support Common Flash Interface (CFI) HARDWARE FEATURES Ready/Busy# (RY/BY#) Output - Provides a hardware method of detecting program and erase operation completion Hardware Reset (RESET...