FLASH ATA Card
HB28C048A6/HB28C032A6 HB28C016A6
FLASH ATA Card 48 MByte/32 MByte/16 MByte
ADE-203-1190A (Z) Rev. 1.0 Dec. 1, 2000 Desc...
Description
HB28C048A6/HB28C032A6 HB28C016A6
FLASH ATA Card 48 MByte/32 MByte/16 MByte
ADE-203-1190A (Z) Rev. 1.0 Dec. 1, 2000 Description
HB28C048A6, HB28C032A6, HB28C016A6 are Flash ATA card. This card complies with PC card ATA standard and is suitable for the usage of data storage memory medium for PC or any other electric equipment. This card is equipped with Hitachi 128 Mega bit Flash memory. This card is suitable for ISA (Industry Standard Architecture) bus interface standard, and read/write unit is 1 sector (512 bytes) sequential access. By using this card it is possible to operate good performance for the system which have PC card slots.
Features
PC card ATA standard specification 68 pin two pieces connector and Type II (5 mm) 3.3 V/5 V single power supply operation ISA standard and Read/Write unit is 512 bytes (sector) sequential access Sector Read/Write transfer rate: 8MB/sec burst Card density is 48 Mega bytes maximum This card is equipped Hitachi 128 Mega bit Flash memory 3 variations of mode access Memory card mode I/O card mode True IDE mode Internal self-diagnostic program operates at VCC power on High reliability based on internal ECC (Error Correcting Code) function Data reliability is 1 error in 10 –14 bits read. Auto Sleep Function
HB28C048/032/016A6
Card Line Up*1
Type No. HB28C048A6 HB28C032A6 HB28C016A6 Notes: 1. 2. 3. 4. Card density Capacity * 4 48 MB 32 MB 16 MB 48,365,568 byte 32,243,712 byte 16,121,856 byte Total sectors/ Sector...
Similar Datasheet