Optical Timing Clock
Preliminary
®
OP4012B
644.53125 MHz
• • • •
Quartz SAW Stabilized Differential Output Technology Very Low Jitter Fund...
Description
Preliminary
®
OP4012B
644.53125 MHz
Quartz SAW Stabilized Differential Output Technology Very Low Jitter Fundamental-Mode Operation at 644.53125 MHz Voltage Tunable for Phase Locked Loop Applications Timing Reference for 10G Optical Ethernet Communications Systems
The OP4012B is a voltage-controlled SAW clock (VCSC) designed for phase-locked loop (PLL) applications in optical data communications systems. The differential outputs of the OP4012B are generated by high-Q, fundamental mode quartz surface acoustic wave (SAW) technology. This technique provides very low output jitter and phase noise, plus excellent immunity to power supply noise. The OP4012B differential outputs feature ±1% symmetry, and can be DC-configured to drive a wide range of high-speed logic families. The OP4012B is packaged in a hermetic metal-ceramic LCC.
Optical Timing Clock
Absolute Maximum Ratings Rating
DC Suppy Voltage Tune Voltage Case Temperature
Value
0 to 5.5 0 to 5.5 -55 to 100
Units
Vdc Vdc °C
SMC-08
Electrical Characteristics
Characteristic Operating Frequency Absolute Frequency Tuning Range Tuning Voltage Tuning Linearity Tuning Sensitivity Modulation Bandwidth Q and Q Output Voltage into 50 Ω (VSWR ≤ 1.2) Operating Load VSWR Symmetry Harmonic Spurious Nonharmonic Spurious Phase Noise @ 100 Hz offset @ 1 kHz offset @ 10 kHz offset Noise Floor Q and Q Jitter RMS Jitter No Noise on VCC 200 mVP-P Noise, from 1 MHz to ½ fO on VCC Input Impedence (Tuning Port) Output DC Resistance...
Similar Datasheet