Transient Voltage Suppressor
Transient Voltage Suppressor
Features:
• • • • Optimized for LAN Protection Applications Low Profile Package With B...
Description
Transient Voltage Suppressor
Features:
Optimized for LAN Protection Applications Low Profile Package With Built-In Strain Relief For Surface Mounted Applications Low Incremental Surge Resistance, Excellent Clamping Capability 400W Peak Pulse Power Capability with a 10/1,000µs Wave Form, Repetition Rate (duty cycle): 0.01% (300W above 78V) Very Fast Response Time High Temperature Soldering Guaranteed : 260°C/10 seconds at Terminals
Mechanical Data
Case : JEDEC DO-214AC molded plastic over passivated chip Terminals : solder plated, solderable per MIL-STD-750, method 2026 Polarity : forint-directional types the colour band denotes the cathode, which is positive with respect to the anode under normal TVS operation Mounting position: any Weight : 0.002oz, 0.064g
Devices for Bidirectional Applications
For Bi-directional devices, use suffix C or CA (e.g. SMAJ10C, SMAJ10CA). Electrical characteristics apply in both directions.
Maximum Ratings and Thermal Characteristics (TA=25°C unless otherwise noted)
Characteristic Peak power dissipation with a 10/1,000μs waveform (Note 1,2, Fig.1) Peak pulse current with a 10/1,000μs waveform (Note 1) Typical thermal resistance, junction to ambient (Note 3) Peak forward surge current, 8.3ms single half sine-wave uni-directional only (Note 2) Typical thermal resistance, junction to ambient (Note 3) Operating junction and storage temperature range Symbol PPPM IPPM RθJA IFSM RθJL TJ, TSTG Value Min. 400 See Next ...
Similar Datasheet