Document
Farnell Order Code: 1641039
FOX MODEL: FXO-HC536R-25 FOX Part Number: 767-25-92 HCMOS, CERAMIC, SMD, OSCILLATOR
Specifications Parameters Frequency Frequency Stability 1 Temperature Range Operating (TOPR) Storage (TSTG) Supply Voltage (VDD) Input Current (IDD) Output Voltage (VOL)
(VOH)
Mechanical / Dimensions (millimeters):
5.15 Max
25.000 MHz ±25 PPM
Top View
#4
#3
3.35 Max
Output Symmetry (50% Vp-p Level) Rise Time (10% ~ 90% Vp-p) (TR) Fall Time (90% ~ 10% Vp-p) (TF) Output Load (HCMOS) Startup Time (TS) Output Enable / Disable Time 2 Phase Jitter (12kHz ~ 20MHz) Maximum Soldering Temp / Time Moisture Sensitivity Level (MSL) Termination Finish
1
-40°C ~ +85°C -55°C ~ +125ºC 3.3V ± 5% 35 mA Max 10% VDD Max 90% VDD Min 45% ~ 55% 3 nS Max 3 nS Max 15 pF Max 10 ms Max 100 nS Max < 1.1pS Typ. 260°C / 10 Seconds 1 Au
Top of Part Is marked with Frequency
#1
#2
Pin 1 Designator (FOX Head or Dot)
1.4 Max
2.54
1.27
#1 Bottom View #4
TP* TP*
#2
1.2
#3
0.64
Recommended Solder Pad Layout 2.54
1.29 2.25
Inclusive of 25ºC tolerance, operating temperature range, input voltage change, load change, aging, shock, and vibration. 2 An internal pullup resistor from pin 1 to pin 4 allows active output if pin 1 is left open. ENABLE/DISABLE FUNCTION Pin 1 OUTPUT (Pin 3)
OPEN '1' Level VIH ≥ 70%VDD '0' Level VIL ≤ 30%VDD
2
2
1.24
Note: XPRESSO HCMOS XOs are designed to fit on industry standard, 4 pad, layouts.
ACTIVE ACTIVE High Z
Pin Connections #1) E/D #3 Output #2 GND #4 VDD *TP are test points and are NC
NOTE: A 0.01µF bypass capacitor should be placed between VDD (Pin4) and GND (Pin 2) to minimize power supply line noise.
RoHS Compliance Status: Compliant
Drawing is for reference to critical specifications defined by size measurements. Certain non-critical visual attributes, such as side castellations, reference pin shape, etc. may vary
Recommended Circuit
0.01 F E/D
NC
#1
#4
NC
VDD
GND
#2
#3
OUT
HCMOS LOAD (15 pF)
NOTE: The above specifications, having been carefully prepared and checked, is believed to be accurate at the time of publication; however, no responsibility is assumed by Fox Electronics for inaccuracies. Reference / Comments Title / Description: Product Specifications Rev: 1 Size: A Drawing Number: DWG-4548-23 Cage: 61429 Part Number: 767-25-92 Draftsperson: AR Approved: BN Date: 08/25/2008
.