Remote controller
AD009-041
AD009-041 Remote controller
1. General Descriptions
The AD009-041 a high-performance 4-bit RISC micro-controll...
Description
AD009-041
AD009-041 Remote controller
1. General Descriptions
The AD009-041 a high-performance 4-bit RISC micro-controller embedded up to 2KX12 bits OTP, 32X4 bits SRAM, 10 Input/Output pins, one input pin and built-in one IR LED drive pin. it’s flexible and costeffective solution for remote control of TV, Fans, Air conditioners ... etc.
2. Features
MCU Operating voltage: 1.8V to 3.6V Operation frequency: MCU run 2 MIPS Memory Size Program ROM size: 2K X12 bits (OTP type) SRAM size: 32x4 bits Wake up function for power-down mode HALT mode wake up source: RTC timer overflow or PA0~3, PB0~3 and PD0~3 edge trigger. Provided 10 input /output pins: each I/O has bit programmable as input or output port, these 10 I/Os also provided edge trigger wake up function and pull up resistors configured by registers. (a) They are provided with high sink current 20mA @VDD=3V, VOL=0.5V. (b) They are provided with drive current 7mA @VDD=3V, VOH=2.5V. (c) Pull up 150k ohm resistor. Provide 1 input pin (PA3) shared with VPP pin, pull up 150k ohm resistor and edge trigger wake up function. Built-in one IR LED drive pin. ( Sink current : IOL=210mA at VDD=3V and VOL=0.3V ) One 8 bits timer, clock source of timer is FMCK /8192( or 4096,2048,1024 ), the content of timer can be cleared and read by program. Built-in internal RC OSC 8 MHz ---frequency deviation within ±2%, VDD=1.8V~3.6V, temp= -20 ºC ~70 ºC Support 1.5 cycle length instruction (NOP15) to generate IR waveform by software...
Similar Datasheet