DatasheetsPDF.com

DTC107 Dataheets PDF



Part Number DTC107
Manufacturers First Silicon
Logo First Silicon
Description Bias Resistor Transistor
Datasheet DTC107 DatasheetDTC107 Datasheet (PDF)

SEMICONDUCTOR TECHNICAL DATA DTC 101 ~ 108 DTC 110 ~ 112 / 114 /117 DTC 123 / 124 Bias Resistor Transistor NPN Silicon Surface Mount Transistor with Monolithic Bias Resistor Network This new series of digital transistors is designed to replace a single device and its external resistor bias network. The BRT (Bias Resistor Transistor) contains a single transistor with a monolithic bias network resistor. The BRT eliminates these individual components by integrating them into a single device. The .

  DTC107   DTC107


Document
SEMICONDUCTOR TECHNICAL DATA DTC 101 ~ 108 DTC 110 ~ 112 / 114 /117 DTC 123 / 124 Bias Resistor Transistor NPN Silicon Surface Mount Transistor with Monolithic Bias Resistor Network This new series of digital transistors is designed to replace a single device and its external resistor bias network. The BRT (Bias Resistor Transistor) contains a single transistor with a monolithic bias network resistor. The BRT eliminates these individual components by integrating them into a single device. The use of a BRT can reduce both system cost and board space. The device is housed in the SOT-23 package which is designed for low power surface mount applications. 3 2 1 SOT–23 (TO–236AB) • Simplifies Circuit Design • Reduces Board Space and Component Count • The SOT-23 package can be soldered using wave or reflow. The modified gull-winged leads absorb thermal stress during soldering eliminating the possibility of damage to the die. PIN 3 PIN 1 BASE (INPUT) R1 COLLECTOR (OUTPUT) PIN 2 EMITTER (GROUND) R2 MAXIMUM RATINGS (TA = 25 C unless otherwise noted) Rating Collector-Base Voltage Collector-Emitter Voltage Collector Current Total Power Dissipation @ TA = 25 C (Note 1.) Derate above 25 C Symbol VCBO VCEO IC PD Value 50 50 100 246 1.5 Unit Vdc Vdc mAdc mW C/W DEVICE MARKING AND RESISTOR VALUES Device DTC101 DTC102 DTC103 DTC104 DTC105 DTC106 DTC107 DTC108 DTC110 DTC111 DTC112 DTC114 DTC117 DTC123 DTC124 Marking A8J A8A A8B A8C A8M A8K A8D A8L A8F A8E A8U A8T A8H A8G A8R R1(K) 4.7 10 22 47 2.2 4.7 10 22 4.7 10 100 47 2.2 1.0 2.2 R2(K) 4.7 10 22 47 47 47 47 47 ∞ ∞ ∞ ∞ 2.2 1.0 ∞ Shipping 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel 1. Device mounted on a FR-4 glass epoxy printed circuit board using the minimum recommended footprint. 2008. 8. 28 Revision No : 1 1/16 DTC 101 ~ 108, DTC 110 ~ 112 / 114 /117, DTC 123 / 124 THERMAL CHARACTERISTICS Rating Thermal Resistance – Junction-to-Ambient (Note 1.) Operating and Storage Temperature Range Maximum Temperature for Soldering Purposes, Time in Solder Bath Symbol RθJA TJ, Tstg TL Value 508 –55 to +150 260 10 Unit C/W C C Sec ELECTRICAL CHARACTERISTICS (TA = 25 C unless otherwise noted) Characteristic Symbol Min Typ Max Unit OFF CHARACTERISTICS Collector-Base Cutoff Current (VCB= 50 V, IE = 0) Collector-Emitter Cutoff Current (VCE= 50 V, IB = 0) Emitter-Base Cutoff Current (VEB= 6.0 V, IC=0) DTC101 DTC102 DTC103 DTC104 DTC105 DTC106 DTC107 DTC108 DTC110 DTC111 DTC112 DTC114 DTC117 DTC123 DTC124 ICBO ICEO IEBO – – – – – – – – – – – – – – – – – 50 50 15 35 60 80 80 80 80 80 160 160 160 160 8.0 3.0 160 – – – – – – – – – – – – – – – – – – – – 30 60 100 140 140 200 140 150 350 350 350 350 15 5.0 350 – 100 500 1.5 0.5 0.2 0.1 0.2 0.18 0.2 0.13 1.9 0.9 0.1 0.2 2.3 4.3 4.0 – – – – – – – – – – – – – – – – – 0.25 Vdc nAdc nAdc mAdc Collector-Base Breakdown Voltage (IC = 10µA, IE = 0) Collector-Emitter Breakdown Voltage (Note 2.), (IC = 2.0 mA, IB = 0) V(BR)CBO V(BR)CEO hFE Vdc Vdc ON CHARACTERISTICS DC Current Gain (VCE= 10 V, IC=5.0mA) DTC101 DTC102 DTC103 DTC104 DTC105 DTC106 DTC107 DTC108 DTC110 DTC111 DTC112 DTC114 DTC117 DTC123 DTC124 Collector-Emitter Saturation Voltage (IC= 10 mA, IB = 0.3 mA) (IC = 10 mA, IB = 5 mA) DTC117 / DTC123 (IC = 10 mA, IB = 1 mA) DTC101 / DTC105 / DTC106 / DTC108 / DTC111 / DTC114 / DTC110 / DTC124 VCE(sat) 2. Pulse Test: Pulse Width < 300µs, Duty Cycle < 2.0%. 2008. 8. 28 Revision No : 1 2/16 DTC 101 ~ 108, DTC 110 ~ 112 / 114 /117, DTC 123 / 124 ELECTRICAL CHARACTERISTICS (TA = 25 C unless otherwise noted) Characteristic Symbol Min Typ Max Unit ON CHARACTERISTICS (Note 3.) Output Voltage (on) (VCC = 5.0 V, VB = 2.5V, RL = 1.0KΩ) DTC101 DTC102 DTC103 DTC105 DTC106 DTC107 DTC108 DTC110 DTC111 DTC117 DTC123 DTC124 DTC104 DTC114 DTC112 DTC123 DTC111 DTC106 DTC110 DTC124 DTC101 DTC102 DTC103 DTC104 DTC105 DTC106 DTC107 DTC108 DTC110 DTC111 DTC112 DTC114 DTC117 DTC123 DTC124 DTC101 / DTC123 / DTC117 DTC102 / DTC103 / DTC104 DTC105 DTC106 DTC107 DTC108 DTC110 / DTC111 / DTC124 DTC112 / DTC114 R1 3.3 7.0 15.4 32.9 1.54 3.3 7.0 15.4 3.3 7.0 70 32.9 1.5 0.7 1.54 0.8 0.8 0.038 0.055 0.17 0.38 – – 4.7 10 22 47 2.2 4.7 10 22 4.7 10 100 47 2.2 1.0 2.2 1.0 1.0 0.047 0.1 0.21 0.47 – – 6.1 13 28.6 61.1 2.86 6.1 13 28.6 6.1 13 130 61.1 2.9 1.3 2.88 1.2 1.2 0.056 0.185 0.25 0.56 – – KΩ VOL – – – – – – – – – – – – – – VOH 4.9 – – – – – – – – – – – – – – – 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 – Vdc Vdc (VCC = 5.0 V, VB = 3.5V, RL = 1.0KΩ) (VCC = 5.0 V, VB = 5.0V, RL = 1.0KΩ) Output Voltage (off) (VCC = 5.0 V, VB = 0.5V, RL = 1.0KΩ) (VCC = 5.0 V, VB = 0.05V, RL = 1.0KΩ) (VCC = 5.0 V, VB = 0.25V, RL = 1.0KΩ) Input Resistor Resistor Ratio R1/R2 3. Pulse Test: Pulse Width < 300µs, Duty Cycle < 2.0%. 2008. 8. 28 Revisi.


DTC104 DTC107 DTC111


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)