AWT1902

DCS1800/PCS1900 GaAs 4.8 V Single Supply Power Amplifier IC DESCRIPTION The AWT1902 is a 3 stage monolithic Power Amplifier IC suited for DCS 1800 (1710-1785) and PCS1900 (1850-1910) cellular telephone applications FEATURES  High Output Power High Efficiency Built in Pulse Control 16 Pin SSOP Plastic Package. 50Ω Input Impedance Low Cost Single Supply AWT1902 TX POWER MMIC Advanced Product Information Rev 3 1. Maximum Ratings Static sensitive electronic devices. Do not operate or store near strong electrostatic, fields. Take proper ESD precautions. PIN Pin 1 - VD1 Pin 2 - VREF RATING +7.5V max., 0 V min. + 5V max., 0 V min. NOTES If VREF is kept high and not pulsed, the amplifier may draw very high currents and permanent damage may occur. AC coupled only, do not apply DC voltage. VSS_IN must be between -3V and -5V to allow proper operation. Pin 3 - RFIN Pin 5 - VDB Pin 6 - VSS_IN Pin 8 - VDC Pin 9 - VD2 Pin 12,13,14 VD3, RFOUT + 12 dBm max. + 7.5V max., 0 V min. - 7.5 V + 7.5V max., 0 V min. + 7.5V max., 0 V min. + 7.5V max., 0 V min. This data sheet contains technical information about product ANADIGICS is planning to introduce. The data and product specifications are subject to change prior to formal introduction. Please note : This device is NOT to be used for device qualification or production. 35 Technology Drive, Warren NJ 07059 z(908)668 5000z(908)668 5132z Email: [email protected] awt1902, 22/04/98, 1 2. ELECTRICAL CHARACTERISTICS: (1) (Pin...