AL9910/ AL9910A/ AL9910-5/ AL9910A-5
UNIVERSAL HIGH VOLTAGE HIGH BRIGHTNESS LED DRIVER
Description
The AL9910/A high vo...
AL9910/ AL9910A/ AL9910-5/ AL9910A-5
UNIVERSAL HIGH VOLTAGE HIGH BRIGHTNESS LED DRIVER
Description
The AL9910/A high voltage PWM LED driver-controller provides an efficient solution for offline high brightness LED lamps from rectified line voltages ranging from 85VAC up to 277VAC. The AL9910 drives external MOSFETs at switching frequencies up to 300kHz, with the switching frequency determined by a single resistor. The AL9910 topology creates a constant current through the LEDs providing constant light output. The output current is programmed by one external resistor and is ultimately determined by the external MOSFET chosen and therefore allows many low current LEDs to be driven as well as a few high current LEDs. The LED brightness can be varied by both Linear and PWM dimming using the AL9910’s LD and PWM_D pins respectively. The PWM_D input operates with duty ratio of 0-100% and frequency of up to several kHz. The AL9910 can withstand input voltages up to 500V which makes it very resilient to transients at standard mains voltages. As well as standard SO-8 package the AL9910 is available in the thermally enhanced SO-8EP package.
Pin Assignments
(Top View) VIN 1 CS 2 GND 3 GATE 4 SO-8
AL9910
8 ROSC 7 LD 6 VDD 5 PWM_D
(Top View) VIN 1 CS 2 GND 3 GATE 4
AL9910
8 ROSC 7 LD 6 VDD 5 PWM_D SO-8EP
Features
>90% Efficiency Universal Rectified 85 to 277VAC Input Range Input Voltage Up to 500V Internal Voltage
Regulator Removes Start-Up Resistor 7.5V MOS...